OP-TEE August 2023

op-tee@lists.trustedfirmware.org

22 participants
13 discussions

by Menna Mahmoud

Hi All, I have an issue with running OP-TEE on the Morello kernel, I posted it here: https://github.com/OP-TEE/optee_os/issues/6244 Can anyone help me? Thanks in advance, Menna

3 years, 1 month

tpm2 device fail on u-boot

by Ruth Glushkin

Hi, I have u-boot based on u-boot 2021.04 I have configuration with fTPM of Microsoft enabled. I have a EVB board with Nuvoton chip. OPTee-OS is based on latest 3.22 upstream version with Nuvoton npcm platform configuration. If I take OPTee-OS without reading HUK from our PCR0 field from non-secured memory, the command works fine. If I add reading HUK, the command fails. Here is the error log: - U-Boot>tpm2 device optee optee: OP-TEE: revision 3.22 (a012b992) I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled E/TC:0 0 std_entry_with_parg:235 Bad arg address 0x7fce2000 Couldn't set TPM 0 (rc = 1) - All other commands of tpm2 that are not connected to fTPM works OK. After loading Linux, xtest works OK. Could you please help me? Thank you in advance, Margarita Glushkin

3 years, 1 month

[PATCH v7 0/5] introduce tee-based EFI Runtime Variable Service

by Masahisa Kojima

This series introduces the tee based EFI Runtime Variable Service. The eMMC device is typically owned by the non-secure world(linux in this case). There is an existing solution utilizing eMMC RPMB partition for EFI Variables, it is implemented by interacting with OP-TEE, StandaloneMM(as EFI Variable Service Pseudo TA), eMMC driver and tee-supplicant. The last piece is the tee-based variable access driver to interact with OP-TEE and StandaloneMM. Changelog: v6 -> v7 Patch #1-#4 are not updated. Patch #5 is added into this series, original patch is here: https://lore.kernel.org/all/20230609094532.562934-1-ilias.apalodimas@linaro… There are two issues in the v6 series and v7 series addresses those. 1) efivar ops is not restored when the tee-supplicant daemon terminates. -> As the following patch says, user must remove the device before terminating tee-supplicant daemon. https://lore.kernel.org/all/20230728134832.326467-1-sumit.garg@linaro.org/ 2) cause panic when someone remounts the efivarfs as RW even if SetVariable is not supported -> The fifth patch addresses this issue. "[PATCH v7 5/5] efivarfs: force RO when remounting if SetVariable is not supported" Changelog: v5 -> v6 - new patch #4 is added in this series, #1-#3 patches are unchanged. automatically update super block flag when the efivarops support SetVariable runtime service, so that user does not need to manually remount the efivarfs as RW. v4 -> v5 - rebase to efi-next based on v6.4-rc1 - set generic_ops.query_variable_info, it works as expected as follows. $ df -h /sys/firmware/efi/efivars/ Filesystem Size Used Avail Use% Mounted on efivarfs 16K 1.3K 15K 8% /sys/firmware/efi/efivars v3 -> v4: - replace the reference from EDK2 to PI Specification - remove EDK2 source code reference comments - prepare nonblocking variant of set_variable, it just returns EFI_UNSUPPORTED - remove redundant buffer size check - argument name change in mm_communicate - function interface changes in setup_mm_hdr to remove (void **) cast v2 -> v3: - add CONFIG_EFI dependency to TEE_STMM_EFI - add missing return code check for tee_client_invoke_func() - directly call efivars_register/unregister from tee_stmm_efi.c rfc v1 -> v2: - split patch into three patches, one for drivers/tee, one for include/linux/efi.h, and one for the driver/firmware/efi/stmm - context/session management into probe() and remove() same as other tee client driver - StMM variable driver is moved from driver/tee/optee to driver/firmware/efi - use "tee" prefix instead of "optee" in driver/firmware/efi/stmm/tee_stmm_efi.c, this file does not contain op-tee specific code, abstracted by tee layer and StMM variable driver will work on other tee implementation. - PTA_STMM_CMD_COMMUNICATE -> PTA_STMM_CMD_COMMUNICATE - implement query_variable_store() but currently not used - no use of TEEC_SUCCESS, it is defined in driver/tee/optee/optee_private.h. Other tee client drivers use 0 instead of using TEEC_SUCCESS - remove TEEC_ERROR_EXCESS_DATA status, it is referred just to output error message Ilias Apalodimas (1): efivarfs: force RO when remounting if SetVariable is not supported Masahisa Kojima (4): efi: expose efivar generic ops register function efi: Add EFI_ACCESS_DENIED status code efi: Add tee-based EFI variable driver efivarfs: automatically update super block flag drivers/firmware/efi/Kconfig | 15 + drivers/firmware/efi/Makefile | 1 + drivers/firmware/efi/efi.c | 18 + drivers/firmware/efi/stmm/mm_communication.h | 236 +++++++ drivers/firmware/efi/stmm/tee_stmm_efi.c | 638 +++++++++++++++++++ drivers/firmware/efi/vars.c | 8 + fs/efivarfs/super.c | 45 ++ include/linux/efi.h | 12 + 8 files changed, 973 insertions(+) create mode 100644 drivers/firmware/efi/stmm/mm_communication.h create mode 100644 drivers/firmware/efi/stmm/tee_stmm_efi.c base-commit: 2e28a798c3092ea42b968fa16ac835969d124898 -- 2.30.2

3 years, 1 month

2026

2025

2024

2023

2022

2021

2020

OP-TEE August 2023