Add a remoteproc TEE (Trusted Execution Environment) driver that will be probed by the TEE bus. If the associated Trusted application is supported on the secure part, this driver offers a client interface to load firmware by the secure part. This firmware could be authenticated by the secure trusted application.
A specificity of the implementation is that the firmware has to be authenticated and optionally decrypted to access the resource table.
Consequently, the boot sequence is:
1) rproc_parse_fw --> rproc_tee_parse_fw remoteproc TEE: - Requests the TEE application to authenticate and load the firmware in the remote processor memories. - Requests the TEE application for the address of the resource table. - Creates a copy of the resource table stored in rproc->cached_table.
2) rproc_load_segments --> rproc_tee_load_fw remoteproc TEE: - Requests the TEE application to load the firmware. Nothing is done at the TEE application as the firmware is already loaded. - In case of recovery, the TEE application has to reload the firmware.
3) rproc_tee_get_loaded_rsc_table remoteproc TEE requests the TEE application for the address of the resource table.
4) rproc_start --> rproc_tee_start - Requests the TEE application to start the remote processor.
The shutdown sequence is:
5) rproc_stop --> rproc_tee_stop - Requests the TEE application to stop the remote processor.
6) rproc_tee_release_fw This function is used to request the TEE application to perform actions to return to the initial state on stop or on error during the boot sequence.
Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@foss.st.com --- Version 20 updates: - rework probe. the remoteproc-tee now probe the remoteproc devices defined in device tree as child. - creation of rproc-service-80a4c275-0a47-4905-8285-1486a9771a08 compatible - use of of_find_compatible_node() to find node in DT - use of of_platform_populate() to probe remoteproc devices - remove device_link_add() as now managed by of_platform_populate) - add "auto_boot" parameter in rproc_tee_register() - rename TA_RPROC_FW_CMD_* TEE CMD in TA_RPROC_CMD_* command - use of DEFINE_MUTEX
Version 19 updates: - rework/fix function headers - use memremap instead of ioremap for the resource table. - realign comments to 80 chars limit, with few exceptions for readability - replace spinlock by mutex and and protect APIs from concurrent access - add support of 64-bit address in rproc_tee_get_loaded_rsc_table() - update copyright year
Version 18 updates: Fix warning: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing --- drivers/remoteproc/Kconfig | 10 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/remoteproc_tee.c | 771 ++++++++++++++++++++++++++++ include/linux/remoteproc_tee.h | 89 ++++ 4 files changed, 871 insertions(+) create mode 100644 drivers/remoteproc/remoteproc_tee.c create mode 100644 include/linux/remoteproc_tee.h
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 48a0d3a69ed0..75265f3f5008 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -23,6 +23,16 @@ config REMOTEPROC_CDEV
It's safe to say N if you don't want to use this interface.
+config REMOTEPROC_TEE + bool "Remoteproc support by a TEE application" + depends on OPTEE + help + Support a remote processor that is managed by an application running in a Trusted + Execution Environment (TEE). This application is responsible for loading the remote + processor firmware image and managing its lifecycle. + + It's safe to say N if the remote processor is not managed by a TEE. + config IMX_REMOTEPROC tristate "i.MX remoteproc support" depends on ARCH_MXC diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 1c7598b8475d..a1a5201982d4 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -11,6 +11,7 @@ remoteproc-y += remoteproc_sysfs.o remoteproc-y += remoteproc_virtio.o remoteproc-y += remoteproc_elf_loader.o obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o +obj-$(CONFIG_REMOTEPROC_TEE) += remoteproc_tee.o obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o diff --git a/drivers/remoteproc/remoteproc_tee.c b/drivers/remoteproc/remoteproc_tee.c new file mode 100644 index 000000000000..081420c35c88 --- /dev/null +++ b/drivers/remoteproc/remoteproc_tee.c @@ -0,0 +1,771 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) STMicroelectronics 2025 + * Author: Arnaud Pouliquen arnaud.pouliquen@foss.st.com + */ + +#include <linux/firmware.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/mutex.h> +#include <linux/remoteproc.h> +#include <linux/remoteproc_tee.h> +#include <linux/slab.h> +#include <linux/tee_drv.h> + +#include "remoteproc_internal.h" + +#define MAX_TEE_PARAM_ARRAY_MEMBER 4 + +/* + * Authentication and load of the firmware image in the remote processor + * memories by the TEE. After this step the firmware is installed in destination + * memories, which can then be locked to prevent access by Linux. + * + * [in] params[0].value.a: remote processor identifier + * [in] params[1].memref: buffer containing a temporary copy of the signed + * image to load. + */ +#define TA_RPROC_CMD_LOAD_FW 1 + +/* + * Start the remote processor by the TEE + * + * [in] params[0].value.a: remote processor identifier + */ +#define TA_RPROC_CMD_START 2 + +/* + * Stop the remote processor by the TEE + * + * [in] params[0].value.a: remote processor identifier + */ +#define TA_RPROC_CMD_STOP 3 + +/* + * Return the address of the resource table, or 0 if not found. + * + * [in] params[0].value.a: remote processor identifier + * [out] params[1].value.a: 32bit LSB resource table memory address + * [out] params[1].value.b: 32bit MSB resource table memory address + * [out] params[2].value.a: 32bit LSB resource table memory size + * [out] params[2].value.b: 32bit MSB resource table memory size + */ +#define TA_RPROC_CMD_GET_RSC_TABLE 4 + +/* + * Release remote processor firmware images and associated resources. + * This command should be used in case an error occurs between the loading of + * the firmware images (TA_RPROC_CMD_LOAD_FW) and the starting of the remote + * processor (TA_RPROC_CMD_START) or after stopping the remote processor + * to release associated resources (TA_RPROC_CMD_STOP). + * + * [in] params[0].value.a: remote processor identifier + */ +#define TA_RPROC_CMD_RELEASE_FW 6 + +struct rproc_tee_context { + struct list_head rproc_list; + struct tee_context *tee_ctx; + struct device *dev; +}; + +/** + * struct rproc_tee - TEE remoteproc structure + * @node: Reference in list + * @rproc: Remoteproc reference + * @rproc_id: remote processor identifier + * @session_id: TEE session identifier + */ +struct rproc_tee { + struct list_head node; + struct rproc *rproc; + u32 rproc_id; + u32 session_id; +}; + +static struct rproc_tee_context rproc_tee_ctx; +static DEFINE_MUTEX(ctx_lock); /* Protects concurrent manipulations of the rproc_tee_ctx*/ + +static struct rproc_tee *rproc_to_trproc(struct rproc *rproc) +{ + struct rproc_tee *trproc; + + list_for_each_entry(trproc, &rproc_tee_ctx.rproc_list, node) + if (trproc->rproc == rproc) + return trproc; + return NULL; +} + +static void rproc_tee_prepare_args(struct rproc_tee *trproc, int cmd, + struct tee_ioctl_invoke_arg *arg, + struct tee_param *param, + unsigned int num_params) +{ + memset(arg, 0, sizeof(*arg)); + memset(param, 0, MAX_TEE_PARAM_ARRAY_MEMBER * sizeof(*param)); + + arg->func = cmd; + arg->session = trproc->session_id; + arg->num_params = num_params + 1; + + param[0] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = trproc->rproc_id, + }; +} + +/** + * rproc_tee_release_fw() - Release the firmware for a TEE-based remote processor + * @rproc: Pointer to the struct rproc representing the remote processor + * + * This function invokes the TA_RPROC_CMD_RELEASE_FW TEE client function to + * release the firmware. It should only be called when the remoteproc state is + * RPROC_OFFLINE or RPROC_DETACHED. The function requests the TEE remoteproc + * application to release the firmware loaded by rproc_tee_load_fw(). + * The request is ignored if the rproc state is RPROC_DETACHED as the remote + * processor is still running. + */ +void rproc_tee_release_fw(struct rproc *rproc) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct rproc_tee *trproc; + struct tee_ioctl_invoke_arg arg; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return; + + if (!rproc_tee_ctx.dev) + goto out; + + trproc = rproc_to_trproc(rproc); + if (!trproc) + goto out; + + /* + * If the remote processor state is RPROC_DETACHED, just ignore the + * request, as the remote processor is still running. + */ + if (rproc->state == RPROC_DETACHED) + goto out; + + if (rproc->state != RPROC_OFFLINE) { + dev_err(rproc_tee_ctx.dev, "unexpected rproc state: %d\n", rproc->state); + goto out; + } + + rproc_tee_prepare_args(trproc, TA_RPROC_CMD_RELEASE_FW, &arg, param, 0); + + ret = tee_client_invoke_func(rproc_tee_ctx.tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(rproc_tee_ctx.dev, + "TA_RPROC_CMD_RELEASE_FW invoke failed TEE err: %#x, ret:%d\n", + arg.ret, ret); + } + +out: + mutex_unlock(&ctx_lock); +} +EXPORT_SYMBOL_GPL(rproc_tee_release_fw); + +/** + * rproc_tee_load_fw() - Load firmware from TEE application + * @rproc: Pointer to the struct rproc representing the remote processor + * @fw: Pointer to the firmware structure containing the firmware data and size + * + * This function invokes the TA_RPROC_CMD_LOAD_FW TEE client function to load + * the firmware. It registers the fw->data as a shared memory region with the + * TEE, and request the TEE to load the firmware. This function can be called + * twice during the remote processor boot, a first by rproc_tee_parse_fw() to + * parse the resource table , and a second time by rproc_tee_load_fw(). + * The TEE application should ignores the command if the firmware + * is already loaded by rproc_tee_parse_fw(). + * + * Return: 0 on success, or an error code on failure + */ +int rproc_tee_load_fw(struct rproc *rproc, const struct firmware *fw) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct rproc_tee *trproc; + struct tee_ioctl_invoke_arg arg; + struct tee_shm *fw_shm; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + goto out; + } + + trproc = rproc_to_trproc(rproc); + if (!trproc) { + ret = -EINVAL; + goto out; + } + + fw_shm = tee_shm_register_kernel_buf(rproc_tee_ctx.tee_ctx, (void *)fw->data, fw->size); + if (IS_ERR(fw_shm)) { + ret = PTR_ERR(fw_shm); + goto out; + } + + rproc_tee_prepare_args(trproc, TA_RPROC_CMD_LOAD_FW, &arg, param, 1); + + /* Provide the address of the firmware image */ + param[1] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, + .u.memref = { + .shm = fw_shm, + .size = fw->size, + .shm_offs = 0, + }, + }; + + ret = tee_client_invoke_func(rproc_tee_ctx.tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(rproc_tee_ctx.dev, + "TA_RPROC_CMD_LOAD_FW invoke failed TEE err: %#x, ret:%d\n", + arg.ret, ret); + if (!ret) + ret = -EIO; + } + + tee_shm_free(fw_shm); + +out: + mutex_unlock(&ctx_lock); + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_load_fw); + +static int rproc_tee_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, + size_t *table_sz) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct rproc_tee *trproc; + struct tee_ioctl_invoke_arg arg; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + goto out; + } + + trproc = rproc_to_trproc(rproc); + if (!trproc) { + ret = -EINVAL; + goto out; + } + + rproc_tee_prepare_args(trproc, TA_RPROC_CMD_GET_RSC_TABLE, &arg, param, 2); + + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + ret = tee_client_invoke_func(rproc_tee_ctx.tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(rproc_tee_ctx.dev, + "TA_RPROC_CMD_GET_RSC_TABLE invoke failed TEE err: %#x, ret:%d\n", + arg.ret, ret); + ret = -EIO; + goto out; + } + + *table_sz = param[2].u.value.a; + if (sizeof(phys_addr_t) == sizeof(u64)) + *table_sz |= param[2].u.value.b << 32; + + if (*table_sz) { + *rsc_pa = param[1].u.value.a; + if (sizeof(phys_addr_t) == sizeof(u64)) + *rsc_pa |= param[1].u.value.b << 32; + } else { + *rsc_pa = 0; + } + +out: + mutex_unlock(&ctx_lock); + return ret; +} + +/** + * rproc_tee_parse_fw() - Get the resource table from TEE application + * @rproc: Pointer to the struct rproc representing the remote processor + * @fw: Pointer to the firmware structure containing the firmware data and size + * + * This function retrieves the loaded resource table and creates a cached_table + * copy. Since the firmware image is signed and potentially encrypted, the + * firmware must be loaded first to access the loaded resource table. + * + * Return: 0 on success, or an error code on failure + */ +int rproc_tee_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + phys_addr_t rsc_table; + void *rsc_va; + size_t table_sz; + int ret; + + if (!rproc) + return -EINVAL; + + /* We need first to Load the firmware, to be able to get the resource table. */ + ret = rproc_tee_load_fw(rproc, fw); + if (ret) + return ret; + + ret = rproc_tee_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); + if (ret) + goto release_fw; + + /* + * We assume here that the memory mapping is the same between the TEE + * and Linux kernel contexts. Else a new TEE remoteproc service could be + * needed to get a copy of the resource table. + */ + rsc_va = memremap(rsc_table, table_sz, MEMREMAP_WC); + if (!rsc_va) { + dev_err(rproc_tee_ctx.dev, "Unable to map memory region: %pa+%zx\n", + &rsc_table, table_sz); + ret = -ENOMEM; + goto release_fw; + } + + /* + * Create a copy of the resource table to have the same behavior as the + * ELF loader. This cached table will be used by the remoteproc core + * after the remoteproc stops to free resources and for crash recovery + * to reapply the settings. + * The cached table will be freed by the remoteproc core. + */ + rproc->cached_table = kmemdup(rsc_va, table_sz, GFP_KERNEL); + memunmap(rsc_va); + + if (!rproc->cached_table) { + ret = -ENOMEM; + goto release_fw; + } + + rproc->table_ptr = rproc->cached_table; + rproc->table_sz = table_sz; + + return 0; + +release_fw: + rproc_tee_release_fw(rproc); + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_parse_fw); + +/** + * rproc_tee_find_loaded_rsc_table() - Find the loaded resource table loaded by + * the TEE application + * @rproc: Pointer to the struct rproc representing the remote processor + * @fw: Pointer to the firmware structure containing the firmware data and size + * + * This function retrieves the physical address and size of the resource table + * loaded by the TEE application. + * + * Return: pointer to the resource table if found, or NULL if not found or size + * is 0 + */ +struct resource_table *rproc_tee_find_loaded_rsc_table(struct rproc *rproc, + const struct firmware *fw) +{ + phys_addr_t rsc_table; + size_t table_sz; + int ret; + + ret = rproc_tee_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); + if (ret) + return NULL; + + rproc->table_sz = table_sz; + if (!table_sz) + return NULL; + + /* + * At this step the memory area that contains the resource table should + * have been registered by the remote proc platform driver and allocated + * by rproc_alloc_registered_carveouts(). + */ + return rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); +} +EXPORT_SYMBOL_GPL(rproc_tee_find_loaded_rsc_table); + +/** + * rproc_tee_start() - Request the TEE application to start the remote processor + * @rproc: Pointer to the struct rproc representing the remote processor + * + * This function invokes the TA_RPROC_CMD_START command to start the remote + * processor. + * + * Return: Returns 0 on success, -EINVAL or -EIO on failure + */ +int rproc_tee_start(struct rproc *rproc) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct rproc_tee *trproc; + struct tee_ioctl_invoke_arg arg; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + goto out; + } + + trproc = rproc_to_trproc(rproc); + if (!trproc) { + ret = -EINVAL; + goto out; + } + + rproc_tee_prepare_args(trproc, TA_RPROC_CMD_START, &arg, param, 0); + + ret = tee_client_invoke_func(rproc_tee_ctx.tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(rproc_tee_ctx.dev, + "TA_RPROC_CMD_START invoke failed TEE err: %#x, ret:%d\n", arg.ret, ret); + if (!ret) + ret = -EIO; + } + +out: + mutex_unlock(&ctx_lock); + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_start); + +/** + * rproc_tee_stop() - Request the TEE application to start the remote processor + * @rproc: Pointer to the struct rproc representing the remote processor + * + * This function invokes the TA_RPROC_CMD_STOP command to stop the remote + * processor. + * + * Return: Returns 0 on success, -EINVAL or -EIO on failure + */ +int rproc_tee_stop(struct rproc *rproc) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct rproc_tee *trproc; + struct tee_ioctl_invoke_arg arg; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + goto out; + } + + trproc = rproc_to_trproc(rproc); + if (!trproc) { + ret = -EINVAL; + goto out; + } + + rproc_tee_prepare_args(trproc, TA_RPROC_CMD_STOP, &arg, param, 0); + + ret = tee_client_invoke_func(rproc_tee_ctx.tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(rproc_tee_ctx.dev, + "TA_RPROC_CMD_STOP invoke failed TEE err: %#x, ret:%d\n", arg.ret, ret); + if (!ret) + ret = -EIO; + } + +out: + mutex_unlock(&ctx_lock); + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_stop); + +static const struct rproc_ops rproc_tee_default_ops = { + .start = rproc_tee_start, + .stop = rproc_tee_stop, + .load = rproc_tee_load_fw, + .parse_fw = rproc_tee_parse_fw, + .find_loaded_rsc_table = rproc_tee_find_loaded_rsc_table, + .release_fw = rproc_tee_release_fw, +}; + +static const struct tee_client_device_id rproc_tee_id_table[] = { + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, + { /* sentinel */ } +}; + +/** + * rproc_tee_register() - Register a remote processor controlled by the TEE application. + * @dev: Pointer to client rproc device + * @rproc: Pointer to the struct rproc representing the remote processor + * @rproc_id: ID of the remote processor + * @auto_boot: flag to indicate if remote processor should be auto-started + * + * This function registers a remote processor that will be managed by a TEE + * application, by opening a session with the TEE client. + * + * Return: Returns 0 on success, or an error code on failure + */ +int rproc_tee_register(struct device *dev, struct rproc **rproc, + unsigned int rproc_id, bool auto_boot) +{ + struct tee_param param[MAX_TEE_PARAM_ARRAY_MEMBER]; + struct tee_ioctl_open_session_arg sess_arg; + struct device_node *np = dev->of_node; + struct tee_client_device *tee_device; + struct rproc *new_rproc; + struct rproc_tee *trproc; + const char *fw_name; + int ret; + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + goto out; + } + + trproc = kzalloc(sizeof(*trproc), GFP_KERNEL); + if (!trproc) { + ret = -ENOMEM; + goto out; + } + + /* Look for an optional firmware name */ + ret = rproc_of_parse_firmware(dev, 0, &fw_name); + if (ret < 0 && ret != -EINVAL) + goto free_tproc; + + new_rproc = rproc_alloc(dev, np->name, &rproc_tee_default_ops, + fw_name, sizeof(*trproc)); + if (!new_rproc) { + ret = -ENOMEM; + goto free_tproc; + } + + tee_device = to_tee_client_device(rproc_tee_ctx.dev); + memset(&sess_arg, 0, sizeof(sess_arg)); + + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); + + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; + sess_arg.num_params = 1; + + param[0] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = rproc_id, + }; + + ret = tee_client_open_session(rproc_tee_ctx.tee_ctx, &sess_arg, param); + if (ret < 0 || sess_arg.ret != 0) { + dev_err(dev, "tee_client_open_session failed, err: %#x\n", sess_arg.ret); + ret = -EINVAL; + goto free_rproc; + } + + trproc->rproc_id = rproc_id; + trproc->session_id = sess_arg.session; + new_rproc->auto_boot = auto_boot; + + ret = rproc_add(new_rproc); + if (ret) + goto close_tee; + + trproc->rproc = new_rproc; + *rproc = new_rproc; + + list_add_tail(&trproc->node, &rproc_tee_ctx.rproc_list); + + mutex_unlock(&ctx_lock); + + return 0; + +close_tee: + if (tee_client_close_session(rproc_tee_ctx.tee_ctx, trproc->session_id)) + dev_err(rproc_tee_ctx.dev, "tee_client_close_session failed\n"); +free_rproc: + rproc_free(new_rproc); +free_tproc: + kfree(trproc); +out: + mutex_unlock(&ctx_lock); + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_register); + +/** + * rproc_tee_unregister - Unregister a remote processor controlled by the TEE + * application. + * @dev: Pointer to client rproc device + * @rproc: Pointer to the struct rproc representing the remote processor + * + * This function unregisters a remote processor previously registered by the + * rproc_tee_register() function. + * + * Return: Returns 0 on success, or an error code on failure + */ +int rproc_tee_unregister(struct device *dev, struct rproc *rproc) +{ + struct rproc_tee *trproc; + int ret; + + if (!rproc_tee_ctx.dev) { + ret = -ENODEV; + return ret; + } + + trproc = rproc_to_trproc(rproc); + if (!trproc) { + ret = -EINVAL; + return ret; + } + + rproc_del(rproc); + rproc_free(rproc); + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + return ret; + + ret = tee_client_close_session(rproc_tee_ctx.tee_ctx, trproc->session_id); + if (ret < 0) + dev_err(rproc_tee_ctx.dev, "tee_client_close_session failed, err: %#x\n", ret); + list_del(&trproc->node); + kfree(trproc); + mutex_unlock(&ctx_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(rproc_tee_unregister); + +static int rproc_tee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + /* Today we support only the OP-TEE, could be extend to other tees */ + return (ver->impl_id == TEE_IMPL_ID_OPTEE); +} + +static const struct of_device_id remoteproc_tee_of_match[] = { + { .compatible = "rproc-service-80a4c275-0a47-4905-8285-1486a9771a08" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, remoteproc_tee_of_match); + +static int rproc_tee_probe(struct device *dev) +{ + struct tee_context *tee_ctx; + struct device_node *np; + int ret; + + pr_err("%s %d", __func__, __LINE__); + np = of_find_compatible_node(NULL, NULL, + remoteproc_tee_of_match[0].compatible); + if (!np) { + dev_err(dev, "Device node not found\n"); + return -ENODEV; + } + + /* Open context with TEE driver */ + tee_ctx = tee_client_open_context(NULL, rproc_tee_ctx_match, NULL, NULL); + if (IS_ERR(tee_ctx)) { + ret = PTR_ERR(tee_ctx); + goto put_node; + } + + ret = mutex_lock_interruptible(&ctx_lock); + if (ret) + goto close_ctx; + + rproc_tee_ctx.dev = dev; + rproc_tee_ctx.tee_ctx = tee_ctx; + INIT_LIST_HEAD(&rproc_tee_ctx.rproc_list); + + mutex_unlock(&ctx_lock); + + ret = device_add_of_node(dev, np); + if (ret) + goto clean_ctx; + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "cannot populate node (%d)\n", ret); + goto clean_ctx; + } + + return 0; + +clean_ctx: + mutex_lock(&ctx_lock); + rproc_tee_ctx.dev = NULL; + rproc_tee_ctx.tee_ctx = NULL; + mutex_unlock(&ctx_lock); + +close_ctx: + tee_client_close_context(tee_ctx); + +put_node: + of_node_put(np); + return ret; +} + +static int rproc_tee_remove(struct device *dev) +{ + of_platform_depopulate(dev); + + device_remove_of_node(dev); + + mutex_lock(&ctx_lock); + tee_client_close_context(rproc_tee_ctx.tee_ctx); + rproc_tee_ctx.dev = NULL; + rproc_tee_ctx.tee_ctx = NULL; + mutex_unlock(&ctx_lock); + + return 0; +} + +MODULE_DEVICE_TABLE(tee, rproc_tee_id_table); + +static struct tee_client_driver rproc_tee_fw_driver = { + .id_table = rproc_tee_id_table, + .driver = { + .name = KBUILD_MODNAME, + .bus = &tee_bus_type, + .probe = rproc_tee_probe, + .remove = rproc_tee_remove, + }, +}; + +static int __init rproc_tee_fw_mod_init(void) +{ + return driver_register(&rproc_tee_fw_driver.driver); +} + +static void __exit rproc_tee_fw_mod_exit(void) +{ + driver_unregister(&rproc_tee_fw_driver.driver); +} + +module_init(rproc_tee_fw_mod_init); +module_exit(rproc_tee_fw_mod_exit); + +MODULE_DESCRIPTION("remote processor TEE module"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/remoteproc_tee.h b/include/linux/remoteproc_tee.h new file mode 100644 index 000000000000..33150cff7a5a --- /dev/null +++ b/include/linux/remoteproc_tee.h @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright(c) 2025 STMicroelectronics + */ + +#ifndef REMOTEPROC_TEE_H +#define REMOTEPROC_TEE_H + +#include <linux/tee_drv.h> +#include <linux/firmware.h> +#include <linux/remoteproc.h> + +#if IS_ENABLED(CONFIG_REMOTEPROC_TEE) + +int rproc_tee_register(struct device *dev, struct rproc **rproc, + unsigned int rproc_id, bool auto_boot); +int rproc_tee_unregister(struct device *dev, struct rproc *rproc); +int rproc_tee_parse_fw(struct rproc *rproc, const struct firmware *fw); +int rproc_tee_load_fw(struct rproc *rproc, const struct firmware *fw); +void rproc_tee_release_fw(struct rproc *rproc); +struct resource_table *rproc_tee_find_loaded_rsc_table(struct rproc *rproc, + const struct firmware *fw); +int rproc_tee_start(struct rproc *rproc); +int rproc_tee_stop(struct rproc *rproc); +int rproc_tee_pa_to_da(struct rproc *rproc, phys_addr_t pa, size_t size, u64 *da); +#else + +static inline int rproc_tee_register(struct device *dev, struct rproc **rproc, + unsigned int rproc_id, bool auto_boot) +{ + return -ENODEV; +} + +static inline int rproc_tee_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int rproc_tee_unregister(struct device *dev, struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int rproc_tee_load_fw(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int rproc_tee_start(struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int rproc_tee_stop(struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline void rproc_tee_release_fw(struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); +} + +static inline struct resource_table * +rproc_tee_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return NULL; +} +#endif /* CONFIG_REMOTEPROC_TEE */ +#endif /* REMOTEPROC_TEE_H */