Hi All,
I'm new to TF-A. While working on enabling Linux on A-520 FVP, I ran into
an issue that I wanted to ask about.
My stack looks like this:TF-A->U-boot->kernel. Initially I was able to boot
on Base FVP(FVP_Base_RevC-2xAEMvA) and get to the linux console. Now we
need to enable the same for A-520 FVP as our soc will be A-520. I saw the
crash happening very early in "cpu_helpers.S.
I made the change in plat/arm/board/fvp/platform.mk by adding
lib/cpus/aarch64/cortex_a520.S in one of the FVP_CPU_LIBS and enabling the
ERRATA_A520_2938996, ERRATA_A520_2858100 and ERRATA_A520_2630792. These
changes helped me get past the TF-A and now i ' m seeing a crash inside
kernel in pci.
16.720973] pci-host-generic 40000000.pci: host bridge /pci@40000000
ranges:
[ 16.721375] pci-host-generic 40000000.pci: MEM
0x0050000000..0x005fffffff -> 0x0050000000
[ 16.722013] pci-host-generic 40000000.pci: ECAM at [mem
0x40000000-0x4fffffff] for [bus 00-ff]
[ 16.723128] pci-host-generic 40000000.pci: PCI host bridge to bus 0000:00
[ 16.723461] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 16.723761] pci_bus 0000:00: root bus resource [mem
0x50000000-0x5fffffff]
[ 16.724101] Internal error: synchronous external abort: 0000000096000010
[#1] SMP
[ 16.724216] Modules linked in:
[ 16.724302] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted
6.15.0-rc7-dirty #12 PREEMPT
[ 16.724449] Hardware name: FVP Base RevC (DT)
[ 16.724531] pstate: 214000c9 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS
BTYPE=--)
[ 16.724666] pc : pci_generic_config_read+0x38/0xb8
[ 16.724802] lr : pci_generic_config_read+0x24/0xb8
[ 16.724939] sp : ffff80008272b940
[ 16.725012] x29: ffff80008272b940 x28: 0000000000000000 x27:
ffff800081dc00b0
[ 16.725205] x26: ffff800081ec9060 x25: ffff800081ec9078 x24:
ffff80008266a9a0
[ 16.725401] x23: 0000000000000000 x22: ffff80008272b9f4 x21:
ffff000800fa8000
[ 16.725594] x20: ffff80008272b964 x19: 0000000000000004 x18:
0000000000000006
[ 16.725781] x17: 6666666666663478 x16: 302d303030303030 x15:
ffff800082edbbbf
[ 16.725980] x14: 0000000000000000 x13: 0000000000000000 x12:
0000000000000000
[ 16.726166] x11: 0000000000000001 x10: 3ea1f6d484b7e318 x9 :
69631046f78aed23
[ 16.726355] x8 : ffff000800169108 x7 : ffff800082250960 x6 :
00000000000000ff
[ 16.726547] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
ffff800090000000
[ 16.726738] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
ffff800090000000
Do i need to do enable somethign else in TF-A?
I tried adding :
pci: pci@40000000 {
compatible = "pci-host-ecam-generic";
device_type = "pci";
bus-range = <0x0 0xff>;
reg = <0x0 0x40000000 0x0 0x10000000>;
ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0
0x10000000>;
};
in plat/arm/board/fvp/fdts/fvp_soc_fw_config.dts but it does not help.
Also I see the kernel is not able to bring all the cpu's online:
[ 0.040364] smp: Bringing up secondary CPUs ...
[ 5.116993] CPU1: failed to come online
[ 5.117063] CPU1: failed in unknown state : 0x0
[ 10.266076] CPU2: failed to come online
[ 10.266152] CPU2: failed in unknown state : 0x0
[ 15.415178] CPU3: failed to come online
[ 15.415247] CPU3: failed in unknown state : 0x0
[ 15.421021] psci: failed to boot CPU4 (-22)
[ 15.421099] CPU4: failed to boot: -22
[ 15.425045] psci: failed to boot CPU5 (-22)
[ 15.425123] CPU5: failed to boot: -22
[ 15.429079] psci: failed to boot CPU6 (-22)
[ 15.429157] CPU6: failed to boot: -22
[ 15.433153] psci: failed to boot CPU7 (-22)
[ 15.433227] CPU7: failed to boot: -22
[ 15.433587] smp: Brought up 1 node, 1 CPU
[ 15.433672] SMP: Total of 1 processors activated.
[ 15.433746] CPU: All CPU(s) started at EL2
I’m still getting familiar with the codebase and community, so apologies if
this has already been addressed. I’d really appreciate any guidance or
pointers, and if this is a known issue or good for a first-time
contributor, I’d be happy to help.
Regards,
Shaunak
