November 2023 - TF-M - lists.trustedfirmware.org

by João Bento

Hello, I have recently trying to flash the B-U585I-IOT02A board by running the 3 scripts generated in the build folder, as I usually do with the STM32L552 board. However, I encountered some unexpected errors as I noticed that the secure and non-secure images were being written to external flash address spaces. I quickly noticed that this was happening because the "flash_layout.h" file defines the variable "EXTERNAL_FLASH". Additionally, the "image_macros_to_preprocess_bl2.c" set the image as encrypted by default with "RE_IMAGE_ENCRYPTED= 0X01", causing the "TFM_UPDATE.sh" script to write to the secondary slots. I found it quite strange because tf-m presented an off-the-shelf solution for the other board while for this board it assumes the use of an external flash. Nevertheless, I tried to work around these limitations by commenting the EXTERNAL_FLASH variable and assigning the "RE_IMAGE_ENCRYPTED= 0X00" similarly to the stm32l552. This led to the images being written to the primary slots defined in the flash layout, however, in runtime I encountered an error that states "Unable to find bootable image". Therefore, my question is: Do I need to make further adjustments, or is it possible that there's a configuration issue that is not compatible with the board? Best regards, João Bento

10 months, 2 weeks

2
4
0 0

Start of TF-M v2.0.0 release

by Anton Komlev

Hello, The branch release/2.0.x<https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/log/?h=release/…> has been created indicating the start of the release process and features freeze. RC1 tag will follow after a successful run of the basic tests. Let me remind that the code is not frozen, and development can be continued on the main branch as described in TF-M Release Process<https://tf-m-user-guide.trustedfirmware.org/releases/release_process.html#r…>. Thanks, Anton

10 months, 2 weeks

1
2
0 0

PSA_FRAMEWORK_HAS_MM_IOVEC

by Quach, Brian

Hi, I saw that PSA_FRAMEWORK_HAS_MM_IOVEC is not permitted for Isolation level 2-3 and transient copies of the input and output data into a 5KB scratch buffer are always made when making a PSA call. This makes sense as FF-Mv1.1 states: “In a system using isolation level 3, a Secure Partitions is not permitted to access another Secure Partition’s Private data. MM-IOVEC can provide a mechanism for one Secure Partition to access the other’s Private data.” But I think the requirements for isolation level 3 could be fulfilled by: If SP detects a Secure caller, it could make a transient copy of I/O data. If SP detects a Non-Secure caller, it could use MMIOVECs or a similar method to access NS memory directly to avoid overhead and limitations of copying the I/O data. Is this logical/ correct? With this approach, an attacker may tamper NS input data while the RoT service is processing those data but rules of isolation level 3 are maintained. Regards, Brian Quach SimpleLink MCU Texas Instruments Inc.

10 months, 2 weeks

2
3
0 0

Various issues in successfully using GDB to debug secure apps on Musca S1 connected over USB DAPLink to a Linux host

by Arun D

Now sure where exactly this belongs, but I already posted question abut the Musca S1 earlier, and this seems relevant. ARM support essentially seem to tell me that they cannot support GDB and they are not certain of DAPLink, and recommend ULINKPLUS debugger with ARM IDE. So wanted to get a sense from anyone who has attempted to use this. In the following I describe the steps to obtain a base line, then provide description in what way GDB / DAPLink seems to misbehave. To get a base line: ~~~~~~~~~~~~~ - I build 'samples/hello_world' app using Zephyr 'v3.4.0'. Copy the 'build/zephyr/zephyr.hex' file to '/media/user/MUSCA_S1' directory when the board is USB. Connect a terminal emulator to the UART exposed by USB DAPLink, e.g. 'picocom -b 115200 -y n /dev/ttyACM0'. I can see on the console the followinbg *** Booting Zephyr OS build zephyr-v3.4.0 *** Hello World! musca_s1 If I press the reset button, the app restarts as well. This is as expected. I note that this is entirely running as in secure mode, that it does not use TF-M. - Next I start 'pyocd-gdbserver'. Then start a GDB session using the 'zephyr.elf' file, 'target remote localhost:3333' to connect it to the gdbserver. It connects ok. So I put a breakpoint at "main", do a 'monitor reset halt', and then continue. The breakpoint at 'main' is hit, I can obtain the backtrace to see it is correct as expected. So my setup seems good. Next I attempt to test a non-secure app with TF-M. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Build the app using Zephyr build env 'west build -b v2m_musca_s1_ns samples/tfm_integration/tfm_psa_test/ -DCONFIG_TFM_PSA_TEST_CRYPTO=y'. Copy 'build/zephyr/tfm_merged.hex' to '/media/user/MUSCA_S1'. Connect a terminal emulator, picocom, to the console, and hit the PBON (power on) button. I see the following output as expected on the console: Musca-S1 Dual Firmware Version 1.9 [WRN] This device was provisioned with dummy keys. This device is NOT SECURE [Sec Thread] Secure image initializing! Booting TF-M 79a6115d3 [INF][Crypto] Initialising HW accelerator... complete. *** Booting Zephyr OS build zephyr-v3.4.0 *** ***** PSA Architecture Test Suite - Version 1.4 ***** Running.. Crypto Suite ****************************************** TEST: 201 | DESCRIPTION: Testing crypto key management APIs | UT: psa_crypto_init [Info] Executing tests from non-secure This is as expected. However, if I press the reset button the board does not appear to reset - this is unexpected. Has anyone seen a different behavior? Is the specific board that I have is misbehaving? - Now I start PyOCD GDB server, start GDB and successfully connect it to the GDB server. The target is halted where it was executing, e.g. Remote debugging using localhost:3333 CC_HalWaitInterruptRND (data=data@entry=1024) at /home/zephyr/zephyrproject/modules/tee/tf-m/trusted-firmware-m/lib/ext/cryptocell-312-runtime/host/src/hal/cc3x/cc_hal.c:107 107 irr = CC_HAL_READ_REGISTER(CC_REG_OFFSET(HOST_RGF, HOST_IRR)); (gdb) This is as expected. - Next I put a breakpoint at 'sprt_main', then issue a 'monitor reset halt', then issue a 'continue', The breakpoint is is NOT hit. I see a blue LED blink at perhaps 4 times per second. This is unexpected. Has anyone seen this behave correctly? Do I have a board that is misbehaving?

10 months, 3 weeks

4
10
2 0

Building TF-M for ARM reference SoC/boards MPS2/MPS3 and Musca S1

by capablegh＠gmail.com

Hello. The ARM MPS2/MPS3 have Cortex M33 two processor configuration. I am building TF-M under the Zephyr OS setup. From the build it appears that the secure (TF-M) and non-secure (Zephyr OS and app) are bound and executed on separate CPUs. Assuming that two CPUs are used, in the build, is there a way to force using same one CPU for TF-M and Zephyr/app, while disabling the second CPU? Thanks.

10 months, 3 weeks

5
12
1 0

Increasing the flash partition for the Secure Firmware in TF-M for MPS2-AN521 board emulated using Qemu

by Gowri Ramshankar

Problem: ARoT app is too large, that the image build fails. Error: /home/gramshan/zephyr-sdk-0.16.1/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld: bin/tfm_s.axf section `.ER_UNPRIV_CODE' will not fit in region `FLASH' /home/gramshan/zephyr-sdk-0.16.1/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld: region `FLASH' overflowed by 114956 bytes Memory region Used Size Region Size %age Used FLASH: 572684 B 447 KB 125.11% RAM: 54556 B 1 MB 5.20% To overcome this issue, I changed the flash_layout header file (https://github.com/zephyrproject-rtos/trusted-firmware-m/blob/master/platfo…) such that the secure side size is (FLASH_S_PARTITION_SIZE) 700+KB from the 512KB default for the MPS2 AN521 app, and correspondingly update the non-secure side FLASH_NS_PARTITION_SIZEto be 300KB. This builds the tfm_merged.hex file, But fails it to boot the app. So, I do not use your ARoT, but just built as non-secure app - the 'hello_world' Zephyr app that prints a one line hello_world on the console, but using the modified partition layout. This too fails to boot, in that the "hello world" is not printed. I debugged this to find that it is BL2 that is failing. I see that the Panic occurs during the image swapping operation, this is because the image to be filled in the primary slot is identified as invalid and the secure boot stops. The TF-M thinks some firmware upgrade is happening, the integrity check fails and panics, thus inducing a Fault Injection Hardening defense. Now I am stuck with this issue and I do not know how to proceed further, any help on how to change the flash partition sizes in a clean manner would be appreciated.

10 months, 3 weeks

3
5
0 0

Scheduling bug

by Bohdan.Hunko＠infineon.com

Hi There seem to be scheduling bug we have found in SPM. This bug is related to handling of interrupts that arrives during SVC call and assert signed for partition. Steps to reproduce: 1. Call psa_wait() from partition (e.g. mailbox partition) 2. During execution of SVC handler generate Interrupt that asserts signal of that partition (e.g. mailbox partition signal ) (adding long delay in SVC handler or adding breakpoint in SVC handler helps to easier reproduce this ) 3. Following sequence happens: * Mailbox IRQ has lower priority than SVC thus SVC is not preempted. * SVC sees that mailbox partition is blocked (as it is waiting for signal and no signals are pending) * SVC triggers pendSV i. Mailbox IRQ and pendSV are both pending * Mailbox IRQ has higher priority than pendSV thus Mailbox IRQ is executed * Mailbox IRQ calls spm_handle_interrupt i. Signal is asserted thus spm_handle_interrupt in thrd_next calls query_state_cb which returns THRD_STATE_RET_VAL_AVAIL and thus tfm_arch_set_context_ret_code is called ii. tfm_arch_set_context_ret_code sets return code using OLD value of partition PSP (as it was never updated, as it is updated in PendSV) * Mailbox IRQ return, pendsv is started and it runs mailbox partition i. Mailbox partition has 0 as signal because return value was written to wrong location is stack Patch I have attached to the mail solves this problem for us BUT it seems more like a workaround than a proper fix( Anyways it would be nice to have this problem review by SPM experts and have proper fix (maybe we have other places with same problem...) Regards, Bohdan Hunko Cypress Semiconductor Ukraine Engineer CSUKR CSS ICW SW FW Mobile: +38099 50 19 714 Bohdan.Hunko(a)infineon.com<mailto:Bohdan.Hunko@infineon.com>

10 months, 3 weeks

2
2
0 0

Merging build split feature branch back to main branch

by David Hu

Hi, I’d like to give you a heads-up that build split feature branch will be merged back to main branch very soon this week. Trusted-firmware-m build split branch: https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/?h=feature… Tf-m-tests build split branch: https://git.trustedfirmware.org/TF-M/tf-m-tests.git/tree/?h=feature-build-s… Build split feature improves how NS side integrate with TF-M SPE and therefore build commands are changed for building regression tests and PSA arch tests. Could you please refer to https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/23898 for updated commands/configuration to integrate NS side and port platforms after build split? If anything is broken after build split, please let us know. It would be also appreciated if you could contribute to build split. 😊 Any feedback or comment is welcome. Best regards, Hu Ziji

10 months, 4 weeks

1
1
0 0

2024

2023

2022

2021

2020

2019

2018

TF-M November 2023