- TF-M - lists.trustedfirmware.org

Why client API is built with tfm_sprt target?

by Roman.Mazurak＠infineon.com

Hi all, I'm wondering why client API is build with tfm_sprt target (Secure Partition Runtime Library)? Client API is used by non-secure clients and secure clients. It means that static library is built once, but used with two different images. And it's expected that such images can use different types of cores, compilation settings, etc... Probably it make sense to build this target in scope of psa_interface. Regards, Roman.

3 years, 2 months

3
3
0 0

mbedtls_platform_setup/teardown in TF-M ?

by Rehan Malak

Dear TF-M developers, I am currently adapting a basic MbedTLS / PSA Crypto example such that it would run on the NS side with TF-M doing the crypto. At the end, this is very similar to this psa_sign_verify_message_test from the NS crypto test suite : https://git.trustedfirmware.org/TF-M/tf-m-tests.git/tree/test/secure_fw/sui… But my build config of MbedTLS has MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT enabled because I have a custom mbedtls_platform_setup / mbedtls_platform_teardown. And I can't see any place in TF-M where mbedtls_platform_setup/mbedtls_platform_teardown are called : ? -> mbedtls_platform_setup ? -> mbedtls_platform_teardown At first, I tried to put this code into the psa_driver_wrapper_init/psa_driver_wrapper_free but I have a similar problem : tfm_crypto_engine_init -> psa_crypto_init -> psa_driver_wrapper_init ? -> mbedtls_psa_crypto_free -> psa_driver_wrapper_free Is there any cmake/Kconfig option or any C macros to hook TF-M initialization/shutdown with mbedtls_platform_setup/mbedtls_platform_teardown without patching TF-M ? If not, could mbedtls_platform_setup be called here ? https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/secure_fw/… or is there a nicer way of doing this ? (btw, I am currently experimenting on qemu mps2-an521) Thanks for any advice ! 🙂 Best regards, Rehan MALAK Intrinsic ID

3 years, 2 months

4
4
0 0

Configuration order

by Roman.Mazurak＠infineon.com

Hi Andrey, Patch 21339<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/21339> introduced changes of configuration order: 1. Platform configuration via TARGET_CONFIG_HEADER_FILE. 2. Project configuration via PROJECT_CONFIG_HEADER_FILE 3. config_base.h It means that target can't change configuration that is expected to be changed by project. Example: 1. Platform must redefine ITS_STACK_SIZE to satisfy driver requirements. The good way for this is to set ITS_STACK_SIZE in config_tfm_target.h. 2. Project developer need to perform some additional debugging or profiling of the product, so the TF-M must be built with extra code that require additional stack size. It means that project developer need to #undef ITS_STACK_SIZE and then redefine it using #define ITS_STACK_SIZE. But this #undef/#define approach is not safe, because it's possible to calculate some other settings using configuration variable in config_tfm_target.h or perform additional configuration validation by config_tfm_target.h. It looks like the new changes created another bunch of problems for TF-M configuration. Regards, Roman.

3 years, 2 months

2
1
0 0

Fwd: [Tf-openci-triage] FYI; Cambridge Lab Down

by Don Harbin

FYI to all TF dev teams leveraging Open CI. Best regards, Don ---------- Forwarded message --------- From: Glen Valante via Tf-openci-triage < tf-openci-triage(a)lists.trustedfirmware.org> Date: Fri, 23 Jun 2023 at 08:41 Subject: [Tf-openci-triage] FYI; Cambridge Lab Down To: tf-openci-triage(a)lists.trustedfirmware.org < tf-openci-triage(a)lists.trustedfirmware.org> Hello All; FYI; the Cambridge lab took a serious power hit and is down. They are scrambling to get things back up, but it may take all weekend. Expect LAVA failures and other strange results. Thanks; -g -- [image: Linaro] <http://www.linaro.org> Glen Valante | *Director Program & Project Management* T: +1.508.517.3461 <1617-320-5000> glen.valante(a)linaro.org | Skype: gvalante <callto:gvalante> -- Tf-openci-triage mailing list -- tf-openci-triage(a)lists.trustedfirmware.org To unsubscribe send an email to tf-openci-triage-leave(a)lists.trustedfirmware.org

3 years, 3 months

1
0
0 0

ST support for secure peripheral partition

by Spinnler, Christian

Hi all, I am currently trying out TF-M together with Zephyr and therefore ported it to the Nucleo-U575ZI-Q evaluation board. I started to struggle when trying to implement an example for a custom Secure Partition (SP) which should access peripherals. I recognized, that the `target_cfg.*` throughout different vendors follow different design principles. E.g. for Nordic controllers an example is given with their nordic-sdk on how to implement peripheral access for a SP (https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.0.0/nrf/samples/tfm/…). For ST devices I tried to transfer this, however, where unsuccessful so far as for the ST microcontrollers the peripheral definitions are missing, and things are just different. Is there any example for ST controllers on how to make specific peripherals only accessible through SPE? Is this currently supported for ST devices? And another question, as the Embedded Open Source Summit arises, is TF-M represented somewhere on conferences? Kind Regards Christian Spinnler Siemens AG Technology Connectivity & Edge T CED SSI-DE Schuckertstrasse 2 91058 Erlangen, Deutschland mailto:christian.spinnler@siemens.com www.siemens.com<https://siemens.com> Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Jim Hagemann Snabe; Vorstand: Roland Busch, Vorsitzender; Cedrik Neike, Matthias Rebellius, Ralf P. Thomas, Judith Wiese; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin-Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322

3 years, 3 months

4
4
0 0

ARMCLANG protections bug

by Bohdan.Hunko＠infineon.com

Hi all, In GCC linker scripts ands of sections are aligned using following syntax: . = ALIGN(TFM_LINKER_XXX_ALIGNMENT); But in ARMClang TFM does not use similar approach, instead it creates Position tags sections like following: TFM_APP_CODE_START +0 ALIGN TFM_LINKER_APP_ROT_LINKER_CODE_ALIGNMENT EMPTY 0x0 { } TFM_APP_ROT_LINKER +0 ALIGN TFM_LINKER_APP_ROT_LINKER_CODE_ALIGNMENT { *tfm_app_rot_partition* (+RO-CODE, +RO-DATA) *libplatform_s* (TFM_*_APP-ROT_ATTR_FN) *.o (TFM_*_APP-ROT_ATTR_FN) } /* * This empty, zero long execution region is here to mark the end address * of APP RoT code. */ TFM_APP_CODE_END +0 ALIGN TFM_LINKER_APP_ROT_LINKER_CODE_ALIGNMENT EMPTY 0x0 { } I believe this is done because clang does not have syntaxes for aligning end of the section (please correct me if I am wrong). This approach results in bug in TFM_UNPRIV_CODE section protections, because TFM_UNPRIV_CODE Base and Limit are used directly and Limit is not aligned. For now this problem stayed undetected because present platforms does not validate region_limit when applying protections. I have created this patch<https://review.trustedfirmware.org/c/TF-M/trusted-firmware-m/+/21169> , which adds validation of region_limit and ran Ci on it and I can see that CI failed in tests for Clang builds So I guess this is the problem that have to be fixed. I see following possible solutions: 1. Align and of TFM_UNPRIV_CODE section (but I guess clang does not support that) 2. Add position tags for _START and END Solution 1 will simpler as it will not require changed in platform code, but I guess clang syntaxes is limiting us here. So my question would be whether there is a plan to fix this issue ? Regards, Bohdan Hunko Cypress Semiconductor Ukraine Engineer CSUKR CSS ICW SW FW Mobile: +38099 50 19 714 Bohdan.Hunko(a)infineon.com<mailto:Bohdan.Hunko@infineon.com>

3 years, 3 months

2
2
0 0

TFM Corstone1000 Cmake Error

by 박진국

Hi all. I am trying to port TFM using the corstone1000 platform. Previously, I was using the 1.7.0 version. TFM version was recently updated and I am trying to use the 1.8.0 version by downloading it from the site below. https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git As instructed by the site below ( https://tf-m-user-guide.trustedfirmware.org/platform/arm/corstone1000/readm… ) I executed the command below. cmake -B build/ -S . -DCMAKE_BUILD_TYPE=Debug -DTFM_TOOLCHAIN_FILE=<tf-m-root>/toolchain_GNUARM. cmake -DTFM_PLATFORM=arm/corstone1000 -DTEST_NS=OFF -DTEST_S=ON -DTEST_S_PS=OFF -DTEST_S_PLATFORM=OFF -DEXTRA_S_TEST_SUITE_PATH=platform/ext/target/arm/corstone1000/ci_regression_tests/ However, I got a cmake error as shown below. - Build type: Debug -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- C_FLAGS : -mcpu=cortex-m0plus -Wall -Wextra CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:144 (target_sources): Cannot specify sources for target "platform_bl1" which is not built by this project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:168 (target_compile_definitions): Cannot specify compile definitions for target "platform_bl1" which is not built by this project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:175 (target_include_directories): Cannot specify include directories for target "platform_bl1_interface" which is not built by this project. I think this is caused by the target for platform_bl1 not being specified, but I don't know how to fix it. I executed cmake using the same configuration as set in corstone1000's config.cmake. Can anyone tell me why I am getting the above error? Any advice would be very helpful. thanks you.

3 years, 3 months

4
4
0 0

TFM Corstone1000 Cmake Error

by 박진국

Hi all. I am trying to port TFM using the corstone1000 platform. Previously, I was using the 1.7.0 version.  TFM version was recently updated and I am trying to use the 1.8.0 version by downloading it from the site below. https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git As instructed by the site below  (https://tf-m-user-guide.trustedfirmware.org/platform/arm/corstone1000/readm…) I executed the command below. cmake -B build/ -S . -DCMAKE_BUILD_TYPE=Debug -DTFM_TOOLCHAIN_FILE=<tf-m-root>/toolchain_GNUARM. cmake -DTFM_PLATFORM=arm/corstone1000 -DTEST_NS=OFF -DTEST_S=ON -DTEST_S_PS=OFF -DTEST_S_PLATFORM=OFF -DEXTRA_S_TEST_SUITE_PATH=platform/ext/target/arm/corstone1000/ci_regression_tests/ However, I got a cmake error as shown below. - Build type: Debug -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- C_FLAGS : -mcpu=cortex-m0plus -Wall -Wextra CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:144 (target_sources):   Cannot specify sources for target "platform_bl1" which is not built by this   project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:168 (target_compile_definitions):   Cannot specify compile definitions for target "platform_bl1" which is not   built by this project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:175 (target_include_directories):   Cannot specify include directories for target "platform_bl1_interface"   which is not built by this project. I think this is caused by the target for platform_bl1 not being specified, but I don't know how to fix it. I executed cmake using the same configuration as set in corstone1000's config.cmake. Can anyone tell me why I am getting the above error? Any advice would be very helpful. thanks you.

3 years, 3 months

1
0
0 0

TFM Corstone1000 Cmake Error

by 박진국

Hi all. I am trying to port TFM using the corstone1000 platform. Previously, I was using the 1.7.0 version.  TFM version was recently updated and I am trying to use the 1.8.0 version by downloading it from the site below. https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git As instructed by the site below  (https://tf-m-user-guide.trustedfirmware.org/platform/arm/corstone1000/readm…) I executed the command below. cmake -B build/ -S . -DCMAKE_BUILD_TYPE=Debug -DTFM_TOOLCHAIN_FILE=<tf-m-root>/toolchain_GNUARM. cmake -DTFM_PLATFORM=arm/corstone1000 -DTEST_NS=OFF -DTEST_S=ON -DTEST_S_PS=OFF -DTEST_S_PLATFORM=OFF -DEXTRA_S_TEST_SUITE_PATH=platform/ext/target/arm/corstone1000/ci_regression_tests/ However, I got a cmake error as shown below. - Build type: Debug -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- Host: Linux/x86_64 -- Target: Generic/arm -- Machine: template -- C_FLAGS : -mcpu=cortex-m0plus -Wall -Wextra CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:144 (target_sources):   Cannot specify sources for target "platform_bl1" which is not built by this   project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:168 (target_compile_definitions):   Cannot specify compile definitions for target "platform_bl1" which is not   built by this project. CMake Error at platform/ext/target/arm/corstone1000/CMakeLists.txt:175 (target_include_directories):   Cannot specify include directories for target "platform_bl1_interface"   which is not built by this project. I think this is caused by the target for platform_bl1 not being specified, but I don't know how to fix it. I executed cmake using the same configuration as set in corstone1000's config.cmake. Can anyone tell me why I am getting the above error? Any advice would be very helpful. thanks you.

3 years, 3 months

1
0
0 0

Using bitwise or (|) / and (&) in Clang scatter file

by Bohdan.Hunko＠infineon.com

Hi For our platform we use some ,across which should set/clear bit 28 of an address (see code below). We do this for convenience reasons. #define IFX_S_ADDRESS_ALIAS(x) ((x) | 0x10000000) #define IFX_NS_ADDRESS_ALIAS(x) ((x) & ~0x10000000) Those macros are used in declaration of S_CODE_START macro. When expended in linker script (tfm_isolation_l3.o), the declaration of LR_CODE section looks as follows: LR_CODE (0x24000000 | 0x10000000) (0x4B000) { This code results in following error: tfm_isolation_l3.o", line 46 (column 21): Error: L6292E: Ignoring unknown attribute '|' specified for region LR_CODE. I tried experimenting with this and found out that when | is changed to or (see following code) then linker works fine: LR_CODE (0x24000000 or 0x10000000) (0x4B000) { Same problem is present when using bitwise and (&). But when using bitwise NOT (~0x...) everything works fine. Having to define our macros in different way brings some problems for our platform, so maybe someone knows how to solve this problem? Maybe there are compilation flags or something like that? Ideally we want | and & to work fine in linker script. Thanks! Regards, Bohdan Hunko Cypress Semiconductor Ukraine Engineer CSUKR CSS ICW SW FW Mobile: +38099 50 19 714 Bohdan.Hunko(a)infineon.com<mailto:Bohdan.Hunko@infineon.com>

3 years, 3 months

2
2
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

TF-M