To finish off the IAR port of TF-M I've added the MPS2 and MPS3
targets.
The MPS2 targets works fine, but I need some assistance with getting
the MPS3/AN524 port to run.
I've followed the tfm_user_guide.rst, but I can't get it running
with ARMCLANG or gcc either, so I suspect there is something I've
missed.
The board runs the an524 selftest successfully, and it shows an
image on the display as well as produces output on one of the USB
serial ports when I configure the board for this.
I added the REMAP options described in the user guide to
/MB/HBI<BoardNumberBoardrevision>/AN524/an524_v2.txt (the doc
mentions v1)
I updated the image.txt file with the suggested lines, except for
the IMAGE0UPDATE/IMAGE1UPDATE: AUTO lines, which caused a boot
error. I tried AUTOQSPI, but settled on NONE.
The LOG.TXT file shows no errors
What am I missing?
Thomas