[PATCH v3 3/3] tee: add MbedTEE driver

This patch adds a Linux TEE driver that communicates with MbedTEE OS, a Trusted Execution Environment for embedded systems (https://github.com/mbedtee) via a fixed shared-memory RPC protocol over architecture-specific transports:

- ARM/ARM64: SMCCC fast/yield calls for REE-to-TEE requests; TEE-to-REE notifications via a GIC SPI edge interrupt. - RISC-V: REE submits commands by writing to a shared-memory r2t-ring that the TEE polls; the TEE notifies the REE by writing to t2r-ring and raising a platform IMSIC MSI. No REE-to-TEE interrupt is used.

The driver implements the TEE subsystem interface (tee_driver_ops) and provides GlobalPlatform TEE Client API support, dynamic shared memory registration, and tee-supplicant support.

Signed-off-by: Xing Loong xing.xl.loong@gmail.com --- Changes in v3: - None (driver changes only in v2)

Changes in v2: - Fix supp_release incorrectly aborting unclaimed requests on close - Fix potential tee_shm double-free on supp_recv error path - Fix async RPC ring skip leaving orphaned payload bytes - Fix COMPLETE_TEE retry to also handle transient -ENOMEM on RISC-V - Fix session leak on close_session allocation failure: release kernel resources before sending RPC

---

Documentation/tee/index.rst | 1 + Documentation/tee/mbedtee.rst | 155 +++++++ MAINTAINERS | 9 + drivers/tee/Kconfig | 3 +- drivers/tee/Makefile | 1 + drivers/tee/mbedtee/Kconfig | 20 + drivers/tee/mbedtee/Makefile | 11 + drivers/tee/mbedtee/core.c | 236 ++++++++++ drivers/tee/mbedtee/mbedtee_drv.h | 269 +++++++++++ drivers/tee/mbedtee/mbedtee_msg.h | 219 +++++++++ drivers/tee/mbedtee/rpc_callee.c | 618 +++++++++++++++++++++++++ drivers/tee/mbedtee/rpc_callee_arm.c | 91 ++++ drivers/tee/mbedtee/rpc_callee_riscv.c | 203 ++++++++ drivers/tee/mbedtee/rpc_caller.c | 532 +++++++++++++++++++++ drivers/tee/mbedtee/rpc_caller_arm.c | 66 +++ drivers/tee/mbedtee/rpc_caller_riscv.c | 192 ++++++++ drivers/tee/mbedtee/shm_pool.c | 105 +++++ drivers/tee/mbedtee/shm_pool.h | 15 + drivers/tee/mbedtee/supp.c | 310 +++++++++++++ include/uapi/linux/tee.h | 1 + 20 files changed, 3056 insertions(+), 1 deletion(-) create mode 100644 Documentation/tee/mbedtee.rst create mode 100644 drivers/tee/mbedtee/Kconfig create mode 100644 drivers/tee/mbedtee/Makefile create mode 100644 drivers/tee/mbedtee/core.c create mode 100644 drivers/tee/mbedtee/mbedtee_drv.h create mode 100644 drivers/tee/mbedtee/mbedtee_msg.h create mode 100644 drivers/tee/mbedtee/rpc_callee.c create mode 100644 drivers/tee/mbedtee/rpc_callee_arm.c create mode 100644 drivers/tee/mbedtee/rpc_callee_riscv.c create mode 100644 drivers/tee/mbedtee/rpc_caller.c create mode 100644 drivers/tee/mbedtee/rpc_caller_arm.c create mode 100644 drivers/tee/mbedtee/rpc_caller_riscv.c create mode 100644 drivers/tee/mbedtee/shm_pool.c create mode 100644 drivers/tee/mbedtee/shm_pool.h create mode 100644 drivers/tee/mbedtee/supp.c

diff --git a/Documentation/tee/index.rst b/Documentation/tee/index.rst index 10c3cec..6415855 100644 --- a/Documentation/tee/index.rst +++ b/Documentation/tee/index.rst @@ -12,3 +12,4 @@ TEE Subsystem amd-tee ts-tee qtee + mbedtee diff --git a/Documentation/tee/mbedtee.rst b/Documentation/tee/mbedtee.rst new file mode 100644 index 0000000..dfb57b8 --- /dev/null +++ b/Documentation/tee/mbedtee.rst @@ -0,0 +1,155 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================== +MbedTEE (Trusted Execution Environment) +============================================== + +The MbedTEE driver supports MbedTEE-based TEEs on ARM TrustZone (SMC calls, +GIC SPI notifications) and RISC-V IMSIC (shared-memory polling, MSI +notifications) platforms. + +The driver requires the REE and TEE CPUs that share the RPC shared memory to +be hardware coherent. In practice, the REE/TEE CPUs are expected to be in the +same CPU cluster, with coherent caches and shared visibility for the ring and +payload buffers. + +Communication overview +====================== + +The driver communicates with the TEE using a fixed shared-memory RPC protocol +layered above the architecture-specific call mechanism. + +ARM platforms (SMC) +------------------- + +On ARM and AArch64 platforms, the driver uses ARM SMC Calling Convention +(SMCCC) to issue fast calls and yield calls to the TEE: + +- **Fast calls** (MBEDTEE_RPC_OS_VERSION, MBEDTEE_RPC_SUPPORT_YIELD, + MBEDTEE_RPC_COMPLETE_TEE) are self-contained SMC calls that do + not rely on shared-memory RPC structures. + +- **Yield calls** post the physical address of an ``rpc_cmd`` structure + in shared memory to the TEE. The TEE may issue RPC requests back to the + driver before the call completes; kernel-directed RPCs are handled + directly, while supplicant RPCs (filesystem and RPMB) are forwarded to + tee-supplicant. + +TEE-to-REE notifications on ARM are delivered via a GIC SPI edge interrupt +specified in the device tree (``interrupts`` property). + +RISC-V platforms +---------------- + +On RISC-V platforms, SMCCC is not available. Communication is split into two +directions: + +- **REE to TEE (R2T)**: The driver submits commands by writing the physical + address of an ``rpc_cmd`` structure to a REE-to-TEE ring buffer + (``r2t-ring``). The TEE polls that ring for new commands. No interrupt + notification is sent; the protocol relies on TEE-side polling. + +- **TEE to REE (T2R)**: The TEE writes an ``rpc_cmd`` into the TEE-to-REE + ring and raises an IMSIC MSI to notify the REE driver. The MSI is + allocated at runtime via the ``msi-parent`` DT property and its identity + is published in ``callee_imsic_id``; ``callee_hartid`` tracks the + target hart for migration during CPU hotplug. No SBI ecall is involved. + +RISC-V REE-to-TEE polling rationale +----------------------------------- + +The REE-to-TEE direction uses polling-only on RISC-V to avoid direct +notification interrupt writes from Linux to TEE-owned interrupt files. +This design is platform-independent and does not require ownership of +TEE-only hart interrupt files. The TEE-to-REE direction remains fully +functional via standard Linux MSI notifications and does not depend on +REE-to-TEE notification latency. + +Shared memory regions +===================== + +Two or three fixed shared memory regions are described in the device tree: + +``t2r-ring`` + Ring buffer used by the TEE to post RPC request notifications to the REE + driver. Present on all platforms. + +``t2r-shm`` + Shared memory region carrying the actual ``rpc_cmd`` payloads for + TEE-to-REE RPCs. Present on all platforms. + +``r2t-ring`` + Ring buffer used by the REE driver to submit commands to the TEE on + RISC-V IMSIC platforms. + +RPC protocol +============ + +The TEE and REE communicate through the ``rpc_cmd`` structure in shared memory +and ring buffers:: + + struct rpc_cmd { + u32 id; /* RPC function ID */ + u16 size; /* payload size in bytes */ + u8 interrupted; /* set if wait was interrupted */ + u8 reserved; /* explicit alignment padding */ + s32 ret; /* return value */ + u32 pad; /* explicit alignment padding */ + u64 waiter_id; /* sync RPC request ID echoed on completion */ + u64 shm; /* physical address of payload (sync RPC) */ + u64 data[]; /* inline payload (async RPC) */ + }; + + struct rpc_ringbuf { + u32 wr; /* producer write pointer */ + u32 rd; /* consumer read pointer */ + u32 callee_ready; /* callee ready flag */ + u32 callee_imsic_id; /* RISC-V only: IMSIC local interrupt id */ + u32 callee_hartid; /* RISC-V only: target hart-id for T2R notification */ + u32 reserved; /* padding, must be zero */ + u8 mem[]; + }; + +For RISC-V T2R MSI, one MSI message targets one hart IMSIC file at a time. +The wire-visible state is split between ``callee_imsic_id`` and +``callee_hartid`` in the ring header; Linux may retarget the MSI across +online CPUs via ``irq_set_affinity()``, and the driver updates those fields +to match the selected hart. + + + +Architecture diagram:: + + User space Kernel TEE side + ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~ + +--------+ +--------------+ + | Client | | Trusted App | + +--------+ +--------------+ + /\ /\ + || +------------+ || + || | MbedTEE- | / + || | supplicant | +--------------+ + || +------------+ | TEE Internal | + / /\ | API | + +-------+ || +--------------+ + | TEE | || +---------+---------------+ | MbedTEE | + | Client| || | TEE | MbedTEE | | Trusted OS | + | API | / | subsys | client driver | +--------------+ + +-------+-------------+-----+--------+----------+----+ | + | Generic TEE API | | RPC (cmd/ring)| | + | IOCTL (TEE_IOC_*) | | SMC / IMSIC | | + +---------------------------+ +---------------+--------------+ + +Device tree binding +=================== + +See Documentation/devicetree/bindings/firmware/mbedtee,tee.yaml for the +complete device tree binding specification, including the RISC-V +``msi-parent`` requirement. + +References +========== + +- [1] MbedTEE project: https://github.com/mbedtee +- [2] ARM SMC Calling Convention: https://developer.arm.com/architectures/system-architectures/software-standa... +- [3] RISC-V IMSIC specification: https://github.com/riscv/riscv-aia diff --git a/MAINTAINERS b/MAINTAINERS index c8d4b91..344b82b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15920,6 +15920,15 @@ F: Documentation/devicetree/bindings/net/dsa/maxlinear,mxl862xx.yaml F: drivers/net/dsa/mxl862xx/ F: net/dsa/tag_mxl862xx.c

+MBEDTEE TEE DRIVER +M: Xing Loong xing.xl.loong@gmail.com +L: op-tee@lists.trustedfirmware.org (moderated for non-subscribers) +S: Maintained +W: https://github.com/mbedtee +F: Documentation/devicetree/bindings/firmware/mbedtee,tee.yaml +F: Documentation/tee/mbedtee.rst +F: drivers/tee/mbedtee/ + MCAN DEVICE DRIVER M: Markus Schneider-Pargmann msp@baylibre.com L: linux-can@vger.kernel.org diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig index 98c3ad0..3dc3439 100644 --- a/drivers/tee/Kconfig +++ b/drivers/tee/Kconfig @@ -2,7 +2,7 @@ # Generic Trusted Execution Environment Configuration menuconfig TEE tristate "Trusted Execution Environment support" - depends on HAVE_ARM_SMCCC || COMPILE_TEST || CPU_SUP_AMD + depends on HAVE_ARM_SMCCC || RISCV || COMPILE_TEST || CPU_SUP_AMD select CRYPTO_LIB_SHA1 select DMA_SHARED_BUFFER select GENERIC_ALLOCATOR @@ -21,5 +21,6 @@ source "drivers/tee/optee/Kconfig" source "drivers/tee/amdtee/Kconfig" source "drivers/tee/tstee/Kconfig" source "drivers/tee/qcomtee/Kconfig" +source "drivers/tee/mbedtee/Kconfig"

endif diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile index 3239b91..33117ea 100644 --- a/drivers/tee/Makefile +++ b/drivers/tee/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_OPTEE) += optee/ obj-$(CONFIG_AMDTEE) += amdtee/ obj-$(CONFIG_ARM_TSTEE) += tstee/ obj-$(CONFIG_QCOMTEE) += qcomtee/ +obj-$(CONFIG_MBEDTEE) += mbedtee/ diff --git a/drivers/tee/mbedtee/Kconfig b/drivers/tee/mbedtee/Kconfig new file mode 100644 index 0000000..b1fa38a --- /dev/null +++ b/drivers/tee/mbedtee/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only +# MbedTEE Trusted Execution Environment Configuration +config MBEDTEE + tristate "MbedTEE" + depends on MMU && OF + depends on ((ARM || ARM64) && HAVE_ARM_SMCCC) || (RISCV && GENERIC_MSI_IRQ) + help + This enables the MbedTEE Trusted Execution Environment (TEE) + driver. + + The driver supports ARM TrustZone (SMC calls, GIC SPI notifications) + and RISC-V IMSIC (shared-memory polling, MSI notifications), with + GlobalPlatform client API via /dev/tee*. + + The DT node should be under a firmware node and have compatible = + "mbedtee,tee" with the RPC ring buffer addresses and, + for ARM/ARM64, an interrupt property for TEE-to-REE notifications. + See Documentation/tee/mbedtee.rst for protocol details. + + If unsure, say N. diff --git a/drivers/tee/mbedtee/Makefile b/drivers/tee/mbedtee/Makefile new file mode 100644 index 0000000..309eb6d --- /dev/null +++ b/drivers/tee/mbedtee/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_MBEDTEE) += mbedtee.o + +mbedtee-y += core.o +mbedtee-y += supp.o +mbedtee-y += shm_pool.o +mbedtee-y += rpc_caller.o rpc_callee.o +mbedtee-$(CONFIG_ARM) += rpc_caller_arm.o rpc_callee_arm.o +mbedtee-$(CONFIG_ARM64) += rpc_caller_arm.o rpc_callee_arm.o +mbedtee-$(CONFIG_RISCV) += rpc_caller_riscv.o rpc_callee_riscv.o diff --git a/drivers/tee/mbedtee/core.c b/drivers/tee/mbedtee/core.c new file mode 100644 index 0000000..5807a93 --- /dev/null +++ b/drivers/tee/mbedtee/core.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/tee_drv.h> +#include <linux/types.h> + +#include "mbedtee_drv.h" +#include "shm_pool.h" + +int mbedtee_get_resource(struct device_node *node, + const char *name, struct resource *res) +{ + struct device_node *rmem; + int idx; + int ret; + + idx = of_property_match_string(node, "memory-region-names", name); + if (idx < 0) + return idx; + + rmem = of_parse_phandle(node, "memory-region", idx); + if (!rmem) + return -ENODEV; + + ret = of_address_to_resource(rmem, 0, res); + of_node_put(rmem); + + if (ret) + return ret; + + res->name = name; + return 0; +} + +static void mbedtee_get_version(struct tee_device *teedev, + struct tee_ioctl_version_data *vers) +{ + struct tee_ioctl_version_data v = { + .impl_id = TEE_IMPL_ID_MBEDTEE, + .impl_caps = 0, + .gen_caps = TEE_GEN_CAP_GP | TEE_GEN_CAP_REG_MEM | + TEE_GEN_CAP_MEMREF_NULL, + }; + + *vers = v; +} + +static int mbedtee_open(struct tee_context *ctx) +{ + struct mbedtee_context_data *ctxdata; + + ctxdata = kzalloc_obj(*ctxdata, GFP_KERNEL); + if (!ctxdata) + return -ENOMEM; + + mutex_init(&ctxdata->mutex); + INIT_LIST_HEAD(&ctxdata->sess_list); + + ctx->data = ctxdata; + ctx->cap_memref_null = true; + + return 0; +} + +static void mbedtee_release(struct tee_context *ctx) +{ + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_context_data *d = ctx->data; + struct mbedtee_session *s, *n; + + if (!d) + return; + + if (d->is_supp_ctx) { + mbedtee_supp_release(&mbedtee->supp, ctx); + } else { + list_for_each_entry_safe(s, n, &d->sess_list, list_node) + mbedtee_close_session(ctx, s->session_id); + } + + kfree(d); + ctx->data = NULL; +} + +static const struct tee_driver_ops mbedtee_ops = { + .get_version = mbedtee_get_version, + .open = mbedtee_open, + .release = mbedtee_release, + .open_session = mbedtee_open_session, + .close_session = mbedtee_close_session, + .invoke_func = mbedtee_invoke_func, + .cancel_req = mbedtee_cancel_req, + .supp_recv = mbedtee_supp_recv, + .supp_send = mbedtee_supp_send, + .shm_register = mbedtee_shm_register, + .shm_unregister = mbedtee_shm_unregister, +}; + +static const struct tee_desc mbedtee_desc = { + .name = "mbedtee", + .ops = &mbedtee_ops, + .owner = THIS_MODULE, +}; + +static int mbedtee_probe(struct platform_device *pdev) +{ + int ret; + long version; + long yield; + struct tee_shm_pool *pool; + struct tee_device *teedev; + struct mbedtee_device *mbedtee; + + mbedtee = devm_kzalloc(&pdev->dev, sizeof(*mbedtee), GFP_KERNEL); + if (!mbedtee) + return -ENOMEM; + + mbedtee->dev = &pdev->dev; + xa_init_flags(&mbedtee->rpc_calls, XA_FLAGS_ALLOC1); + mbedtee_supp_init(&mbedtee->supp); + + /* + * R2T must be ready before T2R is advertised: synchronous T2R RPC + * work replies with COMPLETE_TEE over the R2T path. + */ + ret = mbedtee_r2t_init(mbedtee); + if (ret != 0) + goto err_supp; + + ret = mbedtee_rpc_init(mbedtee); + if (ret != 0) + goto err_r2t; + + version = mbedtee_rpc_fastcall(mbedtee, MBEDTEE_RPC_OS_VERSION, 0, 0, 0); + if (version < 0) { + dev_err(&pdev->dev, "MBEDTEE_RPC_OS_VERSION failed: %ld\n", version); + ret = version; + goto err_rpc; + } + + if (!MBEDTEE_VALID_VERSION(version)) { + dev_err(&pdev->dev, "mbedtee not present (version=0x%lx)\n", + version); + ret = -ENODEV; + goto err_rpc; + } + + yield = mbedtee_rpc_fastcall(mbedtee, MBEDTEE_RPC_SUPPORT_YIELD, 0, 0, 0); + dev_info(&pdev->dev, "version: 0x%06lx yield: %ld\n", version, yield); + + pool = mbedtee_shm_pool_alloc_pages(); + if (IS_ERR(pool)) { + ret = PTR_ERR(pool); + goto err_rpc; + } + + teedev = tee_device_alloc(&mbedtee_desc, &pdev->dev, pool, mbedtee); + if (IS_ERR(teedev)) { + ret = PTR_ERR(teedev); + goto err_pool; + } + + ret = tee_device_register(teedev); + if (ret) + goto err_teedev; + + mbedtee->teedev = teedev; + mbedtee->version = version; + mbedtee->yield = !!yield; + mbedtee->pool = pool; + platform_set_drvdata(pdev, mbedtee); + + dev_dbg(&pdev->dev, "client initialized\n"); + return 0; + +err_teedev: + tee_device_unregister(teedev); +err_pool: + tee_shm_pool_free(pool); +err_rpc: + mbedtee_rpc_uninit(mbedtee); +err_r2t: + mbedtee_r2t_uninit(mbedtee); +err_supp: + mbedtee_supp_uninit(&mbedtee->supp); + xa_destroy(&mbedtee->rpc_calls); + return ret; +} + +static void mbedtee_remove(struct platform_device *pdev) +{ + struct mbedtee_device *mbedtee = platform_get_drvdata(pdev); + + tee_device_unregister(mbedtee->teedev); + /* + * Drain T2R before tearing down R2T: queued RPC work may still need + * to send COMPLETE_TEE over R2T. Destroy the supplicant mutex only + * after RPC work can no longer enter mbedtee_supp_handler(). + */ + mbedtee_rpc_uninit(mbedtee); + mbedtee_r2t_uninit(mbedtee); + mbedtee_supp_uninit(&mbedtee->supp); + tee_shm_pool_free(mbedtee->pool); + xa_destroy(&mbedtee->rpc_calls); +} + +static const struct of_device_id mbedtee_dt_match[] = { + { .compatible = "mbedtee,tee" }, + { }, +}; +MODULE_DEVICE_TABLE(of, mbedtee_dt_match); + +static struct platform_driver mbedtee_driver = { + .probe = mbedtee_probe, + .remove = mbedtee_remove, + .driver = { + .name = "mbedtee", + .of_match_table = mbedtee_dt_match, + }, +}; +module_platform_driver(mbedtee_driver); + +MODULE_AUTHOR("Xing Loong xing.xl.loong@gmail.com"); +MODULE_DESCRIPTION("MbedTEE Trusted Execution Environment driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tee/mbedtee/mbedtee_drv.h b/drivers/tee/mbedtee/mbedtee_drv.h new file mode 100644 index 0000000..59b5b27 --- /dev/null +++ b/drivers/tee/mbedtee/mbedtee_drv.h @@ -0,0 +1,269 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + */ +#ifndef MBEDTEE_DRV_H +#define MBEDTEE_DRV_H + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/atomic.h> +#include <linux/of.h> +#include <linux/ioport.h> +#include <linux/tee_drv.h> +#include <linux/tee_core.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/msi.h> +#include <linux/workqueue.h> +#include <linux/cpuhotplug.h> +#include <linux/cpumask.h> +#include <linux/xarray.h> +#include "mbedtee_msg.h" +#include "shm_pool.h" + +/* + * GlobalPlatform TEE Client API return codes/origins + * used by this driver. Only the codes actually + * referenced in the driver are defined here. + */ +#define TEEC_SUCCESS 0x00000000 +#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C +#define TEEC_ERROR_COMMUNICATION 0xFFFF000E + +#define TEEC_ORIGIN_COMMS 0x00000002 + +#define MBEDTEE_VERSION_MAJOR 1 +#define MBEDTEE_VALID_VERSION(x) (((x) >> 16) == MBEDTEE_VERSION_MAJOR) + +/* Maximum payload size for inline (async) RPC data. */ +#define MBEDTEE_ASYNC_RPC_DATA_MAX 256 + +struct rpc_transport_ops; +struct mbedtee_rpc_call; +struct mbedtee_supp_req; +struct mbedtee_device; + +struct rpc_work { + struct work_struct work; + struct mbedtee_device *mbedtee; + u64 waiter_id; + size_t size; + bool complete_only; + /* Points to ctx->rpc_data (async) or into t2r_shm (sync) */ + void *data; + void (*func)(struct mbedtee_device *mbedtee, void *data, size_t size); +}; + +struct mbedtee_t2r_ctx { + spinlock_t ring_lock; /* protects T2R ring producer/consumer state */ + void *t2r_shm; + phys_addr_t t2r_shm_phys; + resource_size_t t2r_shm_sz; + struct rpc_ringbuf *t2r_ring; + u32 t2r_ring_sz; + u32 t2r_ring_rd; + + void (*rpc_handlers[MBEDTEE_RPC_MAX])(struct mbedtee_device *mbedtee, + void *data, size_t size); + + /* + * Inline buffer for async RPC payloads (waiter_id == 0). + * Sync RPC payloads (waiter_id != 0) live in shared memory (t2r_shm). + */ + u8 rpc_data[MBEDTEE_ASYNC_RPC_DATA_MAX]; + + /* + * CPU-hotplug tracking for T2R interrupt delivery. + * callee_cpus: shadow of cpu_online_mask maintained by the core + * callee layer (rpc_callee.c) for both ARM and RISC-V; used by + * ARM to feed irq_set_affinity() and by RISC-V as the gate for + * MSI migration decisions. + * callee_virq: single MSI virq currently pinned to one CPU + * (RISC-V IMSIC only; 0 for ARM). + * hp_node: per-instance node for cpuhp_setup_state_multi(). + */ + struct cpumask callee_cpus; + int callee_virq; + struct hlist_node hp_node; + bool cpuhp_added; + bool complete_work_pending; + bool pending_async; + u32 pending_size; + struct workqueue_struct *rpc_wq; + struct rpc_work complete_work; + void (*pending_func)(struct mbedtee_device *mbedtee, + void *data, size_t size); +}; + +struct mbedtee_r2t_ctx { + spinlock_t lock; /* protects R2T ring write-side state */ + struct rpc_ringbuf *ring; + u32 ring_sz; + u32 ring_wr; +}; + +struct mbedtee_rpc_transport_ctx { + int rpc_notify_virq; + struct msi_msg rpc_msi_msg; +}; + +struct mbedtee_supp { + struct mutex mutex; /* serializes supp request queue and active requests */ + struct tee_context *ctx; + bool shutting_down; + struct list_head reqs; + struct list_head active_reqs; + struct completion reqs_c; +}; + +struct mbedtee_device { + u32 version; + bool yield; + struct device *dev; + struct tee_device *teedev; + struct tee_shm_pool *pool; + struct mbedtee_supp supp; + struct xarray rpc_calls; + atomic_long_t rpc_call_seq; + const struct rpc_transport_ops *rpc_ops; + struct mbedtee_t2r_ctx t2r; + struct mbedtee_r2t_ctx r2t; + struct mbedtee_rpc_transport_ctx transport; +}; + +struct mbedtee_rpc_call { + struct completion c; + phys_addr_t rpc_phys; + u32 state; + /* + * Wire-format rpc_cmd with inline data[] payload. + * MUST be the last field: rpc.data[] is a flexible array. + */ + struct rpc_cmd rpc; +}; + +struct mbedtee_session { + struct list_head list_node; + u32 session_id; +}; + +struct mbedtee_context_data { + bool is_supp_ctx; + struct mutex mutex; /* serializes session list updates */ + struct list_head sess_list; +}; + +static inline phys_addr_t mbedtee_virt_to_phys(void *va) +{ + if (is_vmalloc_or_module_addr(va)) + return page_to_phys(vmalloc_to_page(va)) + + offset_in_page(va); + + return virt_to_phys(va); +} + +int mbedtee_get_resource(struct device_node *node, + const char *name, struct resource *res); + +/* + * RPC transport operations -- implemented per-architecture. + * + * Caller (rpc_caller_{arm,riscv}.c) platform differences: + * fastcall: ARM/ARM64 - direct SMC (arm_smccc_smc), synchronous, + * never returns -ENOSPC. + * RISC-V - writes rpc_cmd phys addr to the r2t ring + * buffer, then waits for TEE completion via the t2r + * ring. Despite the "fastcall" name this is a + * synchronous ring-buffer round-trip; it may return + * -ENOSPC when the r2t ring is full, and the caller + * must retry (see rpc_routine() for the + * MBEDTEE_RPC_COMPLETE_TEE retry loop). + * yieldcall: ARM/ARM64 - one SMC posting rpc_cmd phys addr, waits + * for completion. + * RISC-V - writes rpc_cmd phys addr to r2t ring, waits + * for completion. + * Callee (rpc_callee_{arm,riscv}.c) platform differences: + * notify: ARM/ARM64 - GIC SPI; the TEE broadcasts via GIC + * hardware (GICv2 ITARGETS=0xFF, GICv3 IROUTER.IRM=1). + * Ring metadata unchanged on CPU affinity events. + * RISC-V - IMSIC MSI; the driver writes callee_hartid + * and callee_imsic_id into the ring so the TEE knows + * where to send the MSI. The affinity handler updates + * both ring fields when the callee CPU goes offline. + * + * init: Set up the interrupt delivery mechanism (MSI on RISC-V, + * GIC/OF-IRQ on ARM/ARM64) and, on RISC-V, write + * ring->callee_hartid and ring->callee_imsic_id. @handler + * is the hard-IRQ handler that drains the ring buffer and + * dispatches RPC commands. + * uninit: Tear down and free all interrupt resources. + * update_affinity: Migrate T2R interrupt delivery to @new_cpu. Called by the + * common cpuhp handler when the current callee CPU goes + * offline. On RISC-V IMSIC, must update ring->callee_hartid + * and ring->callee_imsic_id. ARM uses GIC hardware routing + * and requires no ring update. + * + * The getter is implemented per-architecture in rpc_callee_{arm,riscv}.c; + * only one is linked per build. + */ +struct rpc_transport_ops { + int (*init)(struct mbedtee_device *mbedtee, struct rpc_ringbuf *ring, + irq_handler_t handler); + void (*uninit)(struct mbedtee_device *mbedtee); + int (*update_affinity)(struct mbedtee_device *mbedtee, + unsigned int new_cpu); +}; + +const struct rpc_transport_ops *mbedtee_get_rpc_transport_ops(void); + +/* rpc-callee.c */ +int mbedtee_rpc_init(struct mbedtee_device *mbedtee); +void mbedtee_rpc_uninit(struct mbedtee_device *mbedtee); +irqreturn_t mbedtee_rpc_irq_handler(int irq, void *dev_id); + +/* rpc_caller.c */ +int mbedtee_rpc_call_alloc(struct mbedtee_device *mbedtee, + size_t payload_size, struct mbedtee_rpc_call **call); +void mbedtee_rpc_call_free(struct mbedtee_device *mbedtee, + struct mbedtee_rpc_call *call); +void mbedtee_rpc_complete_call(struct mbedtee_device *mbedtee, + u64 waiter_id); +long mbedtee_rpc_wait_for_completion(struct mbedtee_device *mbedtee, + struct mbedtee_rpc_call *call, bool killable); +int mbedtee_open_session(struct tee_context *ctx, + struct tee_ioctl_open_session_arg *arg, + struct tee_param *param); +int mbedtee_close_session(struct tee_context *ctx, u32 session); +int mbedtee_invoke_func(struct tee_context *ctx, + struct tee_ioctl_invoke_arg *arg, + struct tee_param *param); +int mbedtee_cancel_req(struct tee_context *ctx, u32 cancel_id, + u32 session); +int mbedtee_shm_register(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, unsigned long start); +int mbedtee_shm_unregister(struct tee_context *ctx, struct tee_shm *shm); + +/* rpc-caller-{arm,riscv}.c */ +long mbedtee_rpc_yieldcall(struct mbedtee_device *mbedtee, + unsigned long fn, struct mbedtee_rpc_call *call, + bool interruptible); +long mbedtee_rpc_fastcall(struct mbedtee_device *mbedtee, + unsigned long fn, unsigned long a0, + unsigned long a1, unsigned long a2); +int mbedtee_r2t_init(struct mbedtee_device *mbedtee); +void mbedtee_r2t_uninit(struct mbedtee_device *mbedtee); + +/* supp.c */ +void mbedtee_supp_init(struct mbedtee_supp *supp); +void mbedtee_supp_uninit(struct mbedtee_supp *supp); +void mbedtee_supp_release(struct mbedtee_supp *supp, struct tee_context *ctx); +void mbedtee_supp_abort_all(struct mbedtee_supp *supp); +void mbedtee_supp_handler(struct mbedtee_device *mbedtee, + u32 func, void *data, size_t size); +int mbedtee_supp_recv(struct tee_context *ctx, u32 *func, + u32 *num_params, struct tee_param *param); +int mbedtee_supp_send(struct tee_context *ctx, u32 ret, + u32 num_params, struct tee_param *param); + +#endif /* MBEDTEE_DRV_H */ diff --git a/drivers/tee/mbedtee/mbedtee_msg.h b/drivers/tee/mbedtee/mbedtee_msg.h new file mode 100644 index 0000000..deb2d8c --- /dev/null +++ b/drivers/tee/mbedtee/mbedtee_msg.h @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + * + * MbedTEE RPC wire protocol between REE (Linux) and TEE (MbedTEE OS). + * + * This header is the Linux-kernel mirror of + * mbedtee-os/drivers/rpc/include/rpc/rpc.h. Both copies MUST define + * identical struct layouts. The static_assert() checks at the bottom + * of this file (and the _Static_assert() checks in rpc.h) enforce this + * contract at compile time on every architecture. + * + * Type mapping (wire -> Linux kernel alias): + * uint8_t -> u8 -- boolean flag / padding byte + * uint16_t -> u16 -- byte-count field (< 64 KiB payload limit) + * uint32_t -> u32 -- 32-bit ID, counter, flag, or enum + * int32_t -> s32 -- function-defined signed result code + * uint64_t -> u64 -- physical address, kernel pointer token, or size + * + * Using u64 for all pointer-sized fields eliminates ABI width mismatches + * in mixed-width configurations (e.g. RV64 REE + RV32 TEE, or ARM32-LPAE + * REE + ARM32 TEE). It also prevents phys_addr_t/unsigned-long confusion + * when CONFIG_PHYS_ADDR_T_64BIT=y on a 32-bit REE kernel. + */ + +#ifndef MBEDTEE_MSG_H +#define MBEDTEE_MSG_H + +#include <linux/bits.h> +#include <linux/build_bug.h> +#include <linux/types.h> + +/* + * Fastcall / yield-call classification + */ +#define MBEDTEE_RPC_FASTCALL BIT(31) +#define MBEDTEE_RPC_IS_FASTCALL(fn) ((fn) & MBEDTEE_RPC_FASTCALL) + +/* + * REE -> TEE fast calls + */ +#define MBEDTEE_RPC_OS_VERSION (0x0100 | MBEDTEE_RPC_FASTCALL) +#define MBEDTEE_RPC_SUPPORT_YIELD (0x0101 | MBEDTEE_RPC_FASTCALL) +#define MBEDTEE_RPC_COMPLETE_TEE (0x0102 | MBEDTEE_RPC_FASTCALL) + +/* + * REE -> TEE yield calls + */ +#define MBEDTEE_RPC_OPEN_SESSION 1 +#define MBEDTEE_RPC_INVOKE_SESSION 2 +#define MBEDTEE_RPC_CLOSE_SESSION 3 +#define MBEDTEE_RPC_REGISTER_SHM 5 +#define MBEDTEE_RPC_UNREGISTER_SHM 6 +#define MBEDTEE_RPC_CANCEL 7 + +/* + * TEE -> REE RPC calls + */ +#define MBEDTEE_RPC_COMPLETE_REE 0 +#define MBEDTEE_RPC_REETIME 1 +#define MBEDTEE_RPC_REEFS 2 +#define MBEDTEE_RPC_RPMB 3 +#define MBEDTEE_RPC_MAX 4 + +/* + * Supplicant types (TEE -> REE -> tee-supplicant) + */ +#define MBEDTEE_SUPP_REEFS 1 +#define MBEDTEE_SUPP_RPMB 2 + +/* MbedTEE RPC protocol uses 4 KiB page units regardless of host PAGE_SIZE. */ +#define MBEDTEE_PAGE_SIZE 4096UL + +/* + * REE <-> TEE RPC call command (wire format, 32 bytes fixed header). + * + * Fixed layout: + * +0 id u32 - RPC function identifier + * +4 size u16 - inline payload byte count (0..65535) + * +6 interrupted u8 - set by REE when caller is interrupted + * +7 reserved u8 - must be zero (explicit alignment pad) + * +8 ret s32 - return value written by callee + * +12 pad u32 - must be zero (explicit alignment pad) + * +16 waiter_id u64 - sync RPC request ID echoed on completion + * +24 shm u64 - physical address of sync-RPC shared memory + * +32 data[] u64 - inline payload (waiter_id==0) or empty + * + * Yield-call contract: + * - Session/control RPCs return GlobalPlatform result codes here. + * - Host-local errno values must be translated before being put on the wire. + * - Fast calls may use function-specific return values. + */ +struct rpc_cmd { + u32 id; + u16 size; + u8 interrupted; + u8 reserved; + s32 ret; + u32 pad; + u64 waiter_id; + u64 shm; + u64 data[]; +}; + +/* + * REE -> TEE pages for GP shared memory. + * + * All fields are u64 so the layout is identical when REE is 64-bit + * but TEE is 32-bit (physical addresses, sizes and counts use 64 bits). + */ +struct rpc_memref { + u64 id; + u64 pages; + u64 offset; + u64 size; + u64 cnt; +}; + +/* + * REE -> TEE parameter entry: value or shared memory reference. + */ +union rpc_tee_param { + struct rpc_memref memref; + + struct { + u32 a; + u32 b; + } value; +}; + +/* + * REE -> TEE parameters for RPC session operations + * (MBEDTEE_RPC_OPEN_SESSION / MBEDTEE_RPC_INVOKE_SESSION / + * MBEDTEE_RPC_CLOSE_SESSION). + */ +struct rpc_param { + s32 session_id; + u32 cmd_id; + u32 ret_origin; + u32 params_type; + union rpc_tee_param params[4]; + u8 uuid[16]; + u8 clnt_uuid[16]; +}; + +/* + * REE -> TEE cancellation request (MBEDTEE_RPC_CANCEL). + */ +struct rpc_cancel_req { + u32 session_id; + u32 cancel_id; +}; + +/* + * TEE <-> REE supplicant payloads for REEFS and RPMB RPCs. + * Only the fixed headers are interpreted in the Linux driver. + */ +/* + * Common supplicant command header. Both reefs_cmd and rpmb_cmd embed this + * as their first member so the kernel can write a status code through a + * single cast to (struct supp_cmd_hdr *) without caring about the full + * payload type. The wire layout is identical on every architecture. + */ +struct supp_cmd_hdr { + s32 ret; + s32 op; +}; + +struct reefs_cmd { + struct supp_cmd_hdr hdr; + s32 flags; + s32 fd; + u64 len; + u8 data[]; +}; + +struct rpmb_cmd { + struct supp_cmd_hdr hdr; + u32 nframes; + u8 data[]; +}; + +/* + * TEE <-> REE RPC ring buffer header (24 bytes fixed). + */ +struct rpc_ringbuf { + u32 wr; /* producer write pointer */ + u32 rd; /* consumer read pointer */ + u32 callee_ready; /* callee ready flag */ + u32 callee_imsic_id; /* RISC-V only: IMSIC local interrupt id */ + u32 callee_hartid; /* RISC-V only: target hart-id for T2R notification */ + u32 reserved; /* padding, must be zero */ + u8 mem[]; +}; + +/* + * Compile-time ABI layout assertions. + * These must match the _Static_assert() checks in mbedtee-os rpc/rpc.h. + */ +static_assert(sizeof(struct rpc_cmd) == 32, + "rpc_cmd wire size mismatch"); +static_assert(offsetof(struct rpc_cmd, ret) == 8, + "rpc_cmd.ret offset mismatch"); +static_assert(offsetof(struct rpc_cmd, waiter_id) == 16, + "rpc_cmd.waiter_id offset mismatch"); +static_assert(offsetof(struct rpc_cmd, shm) == 24, + "rpc_cmd.shm offset mismatch"); +static_assert(offsetof(struct rpc_cmd, data) == 32, + "rpc_cmd.data offset mismatch"); +static_assert(sizeof(struct rpc_memref) == 40, + "rpc_memref wire size mismatch"); +static_assert(sizeof(struct rpc_ringbuf) == 24, + "rpc_ringbuf header size mismatch"); +static_assert(sizeof(struct rpc_param) == 208, + "rpc_param wire size mismatch"); +static_assert(sizeof(struct rpc_cancel_req) == 8, + "rpc_cancel_req wire size mismatch"); + +#endif /* MBEDTEE_MSG_H */ diff --git a/drivers/tee/mbedtee/rpc_callee.c b/drivers/tee/mbedtee/rpc_callee.c new file mode 100644 index 0000000..e3373a7 --- /dev/null +++ b/drivers/tee/mbedtee/rpc_callee.c @@ -0,0 +1,618 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + * TEE->REE callee-side: handles interrupts from TEE, processes RPC requests. + */ +#include <linux/cpu.h> +#include <linux/cpuhotplug.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ktime.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/tee_drv.h> +#include <linux/workqueue.h> + +#include "mbedtee_drv.h" + +/* + * CPU hotplug state shared across all mbedtee instances (registered once). + */ +static int mbedtee_cpuhp_state = -EINVAL; +static unsigned int mbedtee_cpuhp_instances; +static DEFINE_MUTEX(mbedtee_cpuhp_mutex); +/* rpc_routine() runs on workqueue, re-drains ring on completion */ +static void rpc_routine(struct work_struct *work); + +/* + * Common CPU-online handler: add the new CPU into the eligible T2R + * delivery set and let the transport re-apply affinity. + */ +static int mbedtee_cpu_online(unsigned int cpu, struct hlist_node *node) +{ + struct mbedtee_t2r_ctx *ctx = + hlist_entry(node, struct mbedtee_t2r_ctx, hp_node); + struct mbedtee_device *mbedtee = + container_of(ctx, struct mbedtee_device, t2r); + unsigned int target_cpu; + + if (!ctx->t2r_ring || cpumask_test_cpu(cpu, &ctx->callee_cpus)) + return 0; + + cpumask_set_cpu(cpu, &ctx->callee_cpus); + target_cpu = cpumask_first(&ctx->callee_cpus); + + if (mbedtee->rpc_ops && mbedtee->rpc_ops->update_affinity) + mbedtee->rpc_ops->update_affinity(mbedtee, target_cpu); + + return 0; +} + +/* + * Common CPU-offline handler: migrates T2R interrupt delivery to another + * online CPU when the current callee CPU is being taken offline. + * + * The transport-specific update_affinity() callback handles the actual + * interrupt migration (e.g. irq_set_affinity + callee_hartid update for + * RISC-V IMSIC; irq_set_affinity only for ARM - no ring update needed). + */ +static int mbedtee_cpu_offline(unsigned int cpu, struct hlist_node *node) +{ + struct mbedtee_t2r_ctx *ctx = + hlist_entry(node, struct mbedtee_t2r_ctx, hp_node); + struct mbedtee_device *mbedtee = + container_of(ctx, struct mbedtee_device, t2r); + unsigned int new_cpu; + + if (!ctx->t2r_ring || !cpumask_test_cpu(cpu, &ctx->callee_cpus)) + return 0; + + /* + * Remove the dying CPU from the eligible set. If the set is now + * empty (all CPUs going away at once -- highly unlikely but safe), + * fall back to CPU 0 which Linux guarantees to be the last offline. + */ + cpumask_clear_cpu(cpu, &ctx->callee_cpus); + if (cpumask_empty(&ctx->callee_cpus)) + cpumask_set_cpu(0, &ctx->callee_cpus); + + new_cpu = cpumask_first(&ctx->callee_cpus); + + if (mbedtee->rpc_ops && mbedtee->rpc_ops->update_affinity) + mbedtee->rpc_ops->update_affinity(mbedtee, new_cpu); + return 0; +} + +static inline size_t t2r_available_size(struct mbedtee_t2r_ctx *ctx) +{ + u32 wr; + u32 rd; + u32 shm_size = ctx->t2r_ring_sz; + + /* Pair with producer release store after writing ring payload. */ + wr = smp_load_acquire(&ctx->t2r_ring->wr); + rd = READ_ONCE(ctx->t2r_ring_rd); + + if (wr > shm_size) + return 0; + + if (wr >= rd) + return wr - rd; + return shm_size + wr - rd; +} + +static void t2r_ring_copy(struct mbedtee_t2r_ctx *ctx, + void *data, size_t size, u32 rd) +{ + u32 remain; + u32 shm_size = ctx->t2r_ring_sz; + struct rpc_ringbuf *shm = ctx->t2r_ring; + + if (rd + size <= shm_size) { + memcpy(data, &shm->mem[rd], size); + } else { + remain = rd + size - shm_size; + memcpy(data, &shm->mem[rd], size - remain); + memcpy((u8 *)data + size - remain, + &shm->mem[0], remain); + } +} + +static void t2r_ring_advance(struct mbedtee_t2r_ctx *ctx, size_t size) +{ + u32 rd = READ_ONCE(ctx->t2r_ring_rd); + u32 shm_size = ctx->t2r_ring_sz; + struct rpc_ringbuf *shm = ctx->t2r_ring; + + if (rd + size > shm_size) + rd = rd + size - shm_size; + else + rd += size; + + WRITE_ONCE(ctx->t2r_ring_rd, rd); + /* Publish updated consumer index after command parsing is complete. */ + smp_store_release(&shm->rd, rd); +} + +/* + * Read and consume @size bytes from the TEE-to-REE ring buffer. + * Must be called with ctx->ring_lock held. + */ +static void t2r_ring_read(struct mbedtee_t2r_ctx *ctx, + void *data, size_t size) +{ + t2r_ring_copy(ctx, data, size, READ_ONCE(ctx->t2r_ring_rd)); + t2r_ring_advance(ctx, size); +} + +static bool rpc_queue_complete_only(struct mbedtee_t2r_ctx *ctx, + u64 waiter_id) +{ + if (ctx->complete_work_pending) + return false; + + ctx->complete_work_pending = true; + ctx->complete_work.waiter_id = waiter_id; + queue_work(ctx->rpc_wq, &ctx->complete_work.work); + + return true; +} + +/* + * Try to pick the next RPC command from the ring buffer. + * + * For asynchronous RPCs the data payload follows the cmd header in the + * ring. If the payload has not fully arrived yet the cmd header is still + * consumed (it was already read) but the entry is marked incomplete so + * that the next IRQ resumes reading the payload instead of re-reading + * a header. + * + * For synchronous RPCs (waiter_id != 0) the work descriptor is allocated + * BEFORE the ring header is consumed. This guarantees that if the + * allocator returns NULL the ring entry is left intact so the IRQ + * handler will retry on the next wake-up rather than leaving a TEE + * thread blocked with no response. + * + * Returns a work descriptor on success, or NULL when no complete entry + * is available. + */ +static struct rpc_work *rpc_pick_next(struct mbedtee_device *mbedtee, + struct mbedtee_t2r_ctx *ctx, struct rpc_work *c) +{ + struct rpc_cmd cmd; + void (*func)(struct mbedtee_device *mbedtee, void *data, size_t size); + struct rpc_work *new_work = NULL; + resource_size_t off; + phys_addr_t shm_phys; + u64 shm_wire; + + /* Resume reading payload of a previously incomplete async RPC */ + if (ctx->pending_async) { + if (t2r_available_size(ctx) < ctx->pending_size) + return NULL; + ctx->pending_async = false; + t2r_ring_read(ctx, c->data, ctx->pending_size); + c->func = ctx->pending_func; + c->size = ctx->pending_size; + c->waiter_id = 0; + return c; + } + + if (t2r_available_size(ctx) < sizeof(cmd)) + return NULL; + + /* + * Peek at the header without advancing the ring pointer. + * For sync RPCs we must pre-allocate before consuming the entry. + */ + memset(&cmd, 0, sizeof(cmd)); + t2r_ring_copy(ctx, &cmd, sizeof(cmd), READ_ONCE(ctx->t2r_ring_rd)); + + if (cmd.id >= MBEDTEE_RPC_MAX) + goto skip; + + func = ctx->rpc_handlers[cmd.id]; + if (!func) + goto skip; + + if (cmd.waiter_id == 0) { + /* Async RPC: payload follows header in the ring */ + if (cmd.size > sizeof(ctx->rpc_data)) + goto skip; + + /* Consume the header now that we know it is valid */ + t2r_ring_advance(ctx, sizeof(cmd)); + + if (t2r_available_size(ctx) < cmd.size) { + /* Mark as incomplete, resume on next iteration */ + ctx->pending_async = true; + ctx->pending_size = cmd.size; + ctx->pending_func = func; + return NULL; + } + + t2r_ring_read(ctx, c->data, cmd.size); + } else { + /* Sync RPC: data lives in the shared memory region */ + shm_wire = cmd.shm; + shm_phys = (phys_addr_t)shm_wire; + if ((u64)shm_phys != shm_wire) + goto skip; + + if (shm_phys < ctx->t2r_shm_phys) + goto skip; + + off = shm_phys - ctx->t2r_shm_phys; + if (cmd.size == 0 || cmd.size > ctx->t2r_shm_sz) + goto skip; + + if (off > ctx->t2r_shm_sz - cmd.size) + goto skip; + + new_work = kzalloc_obj(*new_work, GFP_ATOMIC); + if (!new_work) + return NULL; + + t2r_ring_advance(ctx, sizeof(cmd)); + + c = new_work; + c->mbedtee = mbedtee; + c->data = ctx->t2r_shm + off; + } + + c->func = func; + c->waiter_id = cmd.waiter_id; + c->size = cmd.size; + + return c; + +skip: + /* + * If this was a sync RPC (waiter_id != 0) we must notify the TEE + * thread so it does not wait forever. Defer the completion fastcall + * to process context because transport implementations may sleep. + * If the single deferred-completion slot is already in use, leave the + * header in place and retry after the pending completion has drained. + */ + if (cmd.waiter_id != 0 && !rpc_queue_complete_only(ctx, cmd.waiter_id)) + return NULL; + + /* + * Bad or unhandled entry: consume header plus any inline payload + * (async RPC payloads follow the header in the ring) to keep the + * ring moving. For sync RPCs payload is in t2r_shm, not the ring. + */ + t2r_ring_advance(ctx, sizeof(cmd) + (cmd.waiter_id ? 0 : cmd.size)); + + return NULL; +} + +static void rpc_drain_ring(struct mbedtee_device *mbedtee) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + struct rpc_work rw = {}, *c = NULL; + unsigned long flags; + + if (!ctx->t2r_ring) + return; + + spin_lock_irqsave(&ctx->ring_lock, flags); + while (READ_ONCE(ctx->t2r_ring_rd) != + /* Pair with producer store-release after ring write. */ + smp_load_acquire(&ctx->t2r_ring->wr)) { + rw.data = ctx->rpc_data; + c = rpc_pick_next(mbedtee, ctx, &rw); + if (!c) + break; + + if (c->waiter_id == 0) { + c->func(mbedtee, c->data, c->size); + } else { + INIT_WORK(&c->work, rpc_routine); + queue_work(ctx->rpc_wq, &c->work); + } + } + spin_unlock_irqrestore(&ctx->ring_lock, flags); +} + +static void rpc_routine(struct work_struct *work) +{ + struct rpc_work *c = container_of(work, struct rpc_work, work); + struct mbedtee_t2r_ctx *ctx = &c->mbedtee->t2r; + long ret; + + if (!c->complete_only) + c->func(c->mbedtee, c->data, c->size); + + /* + * COMPLETE_TEE must reach the TEE thread that issued the sync RPC. + * On RISC-V the notification uses a shared ring buffer that may be + * transiently full when many RPCs are in flight concurrently. + * Keep retrying rather than silently dropping the completion, which + * would leave the TEE thread blocked in rpc_call_sync forever. + * On ARM the fastcall is a direct SMC so -ENOSPC never occurs. + */ + do { + ret = mbedtee_rpc_fastcall(c->mbedtee, MBEDTEE_RPC_COMPLETE_TEE, + (unsigned long)c->waiter_id, 0, 0); + if (ret != -ENOSPC && ret != -ENOMEM) + break; + cond_resched(); + } while (1); + + if (c != &ctx->complete_work) { + kfree(c); + return; + } + + WRITE_ONCE(ctx->complete_work_pending, false); + rpc_drain_ring(c->mbedtee); +} + +/* + * Hard IRQ handler -- drains the TEE-to-REE ring buffer. + * + * Asynchronous RPCs (waiter_id == 0) are handled inline since all async + * handlers (complete(), ktime_get_real_ts64()) are non-blocking. + * + * Synchronous RPCs (waiter_id != 0) may block waiting for the + * tee-supplicant, so they are dispatched to a workqueue. + */ +irqreturn_t mbedtee_rpc_irq_handler(int irq, void *dev_id) +{ + struct mbedtee_device *mbedtee = dev_id; + + if (!mbedtee) + return IRQ_NONE; + + rpc_drain_ring(mbedtee); + + return IRQ_HANDLED; +} + +static void mbedtee_rpc_complete(struct mbedtee_device *mbedtee, + void *data, size_t size) +{ + u64 waiter_id; + + if (size < sizeof(waiter_id)) + return; + + memcpy(&waiter_id, data, sizeof(waiter_id)); + if (!waiter_id) + return; + + mbedtee_rpc_complete_call(mbedtee, waiter_id); +} + +static void mbedtee_ree_time(struct mbedtee_device *mbedtee, + void *data, size_t size) +{ + struct timespec64 *ts = data; + + if (size < sizeof(*ts)) + return; + + ktime_get_real_ts64(ts); +} + +static void mbedtee_reefs_supp(struct mbedtee_device *mbedtee, + void *data, size_t size) +{ + mbedtee_supp_handler(mbedtee, MBEDTEE_SUPP_REEFS, data, size); +} + +static void mbedtee_rpmb_supp(struct mbedtee_device *mbedtee, + void *data, size_t size) +{ + mbedtee_supp_handler(mbedtee, MBEDTEE_SUPP_RPMB, data, size); +} + +static void mbedtee_register_rpc(struct mbedtee_device *mbedtee, + u32 id, void (*func)(struct mbedtee_device *mbedtee, + void *data, size_t size)) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + + if (WARN_ON(id >= MBEDTEE_RPC_MAX || !func)) + return; + + ctx->rpc_handlers[id] = func; +} + +int mbedtee_rpc_init(struct mbedtee_device *mbedtee) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + struct device_node *node = mbedtee->dev->of_node; + struct resource res; + bool cpuhp_state_created = false; + int ret; + + memset(ctx, 0, sizeof(*ctx)); + spin_lock_init(&ctx->ring_lock); + mbedtee->rpc_ops = mbedtee_get_rpc_transport_ops(); + if (!mbedtee->rpc_ops) + return -EIO; + + ret = mbedtee_get_resource(node, "t2r-ring", &res); + if (ret) { + dev_err(mbedtee->dev, "t2r-ring not found in DT\n"); + return ret; + } + + ctx->t2r_ring = memremap(res.start, resource_size(&res), + MEMREMAP_WB); + if (!ctx->t2r_ring) { + dev_err(mbedtee->dev, "failed to map t2r ring\n"); + return -ENOMEM; + } + if (resource_size(&res) <= sizeof(struct rpc_ringbuf)) { + dev_err(mbedtee->dev, "t2r-ring too small\n"); + memunmap(ctx->t2r_ring); + ctx->t2r_ring = NULL; + return -EINVAL; + } + ctx->t2r_ring_sz = resource_size(&res) - sizeof(struct rpc_ringbuf); + /* Observe latest producer index only after ring metadata is visible. */ + WRITE_ONCE(ctx->t2r_ring_rd, smp_load_acquire(&ctx->t2r_ring->rd)); + + dev_dbg(mbedtee->dev, "t2r-ring %pa\n", &res.start); + + ret = mbedtee_get_resource(node, "t2r-shm", &res); + if (ret) { + dev_err(mbedtee->dev, "t2r-shm not found in DT\n"); + goto err_ring; + } + + ctx->t2r_shm_phys = res.start; + ctx->t2r_shm_sz = resource_size(&res); + ctx->t2r_shm = memremap(res.start, ctx->t2r_shm_sz, + MEMREMAP_WB); + if (!ctx->t2r_shm) { + dev_err(mbedtee->dev, "failed to map t2r shm\n"); + ret = -ENOMEM; + goto err_ring; + } + + dev_dbg(mbedtee->dev, "t2r-shm %pa\n", &res.start); + + ctx->rpc_wq = alloc_workqueue("mbedtee-rpc", WQ_UNBOUND, 0); + if (!ctx->rpc_wq) { + dev_err(mbedtee->dev, "failed to create rpc workqueue\n"); + ret = -ENOMEM; + goto err_shm; + } + + ctx->complete_work.mbedtee = mbedtee; + ctx->complete_work.complete_only = true; + INIT_WORK(&ctx->complete_work.work, rpc_routine); + + mbedtee_register_rpc(mbedtee, MBEDTEE_RPC_COMPLETE_REE, mbedtee_rpc_complete); + mbedtee_register_rpc(mbedtee, MBEDTEE_RPC_REETIME, mbedtee_ree_time); + mbedtee_register_rpc(mbedtee, MBEDTEE_RPC_REEFS, mbedtee_reefs_supp); + mbedtee_register_rpc(mbedtee, MBEDTEE_RPC_RPMB, mbedtee_rpmb_supp); + + /* + * Register cpuhp instance BEFORE enabling interrupts so that + * T2R delivery migration is in place before the first IRQ fires. + */ + mutex_lock(&mbedtee_cpuhp_mutex); + if (mbedtee_cpuhp_state < 0) { + mbedtee_cpuhp_state = + cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, + "tee/mbedtee:rpc-callee", + mbedtee_cpu_online, + mbedtee_cpu_offline); + if (mbedtee_cpuhp_state < 0) { + ret = mbedtee_cpuhp_state; + mutex_unlock(&mbedtee_cpuhp_mutex); + goto err_wq; + } + cpuhp_state_created = true; + } + + ret = cpuhp_state_add_instance(mbedtee_cpuhp_state, &ctx->hp_node); + if (!ret) { + mbedtee_cpuhp_instances++; + ctx->cpuhp_added = true; + } else if (cpuhp_state_created) { + cpuhp_remove_multi_state(mbedtee_cpuhp_state); + mbedtee_cpuhp_state = -EINVAL; + } + mutex_unlock(&mbedtee_cpuhp_mutex); + if (ret != 0) + goto err_wq; + + ret = mbedtee->rpc_ops->init(mbedtee, ctx->t2r_ring, + mbedtee_rpc_irq_handler); + if (ret != 0) + goto err_cpuhp; + + /* Signal the TEE that the REE callee is ready to receive. */ + smp_store_release(&ctx->t2r_ring->callee_ready, true); + + return 0; + +err_cpuhp: + mutex_lock(&mbedtee_cpuhp_mutex); + if (mbedtee_cpuhp_state >= 0 && ctx->cpuhp_added) { + cpuhp_state_remove_instance_nocalls(mbedtee_cpuhp_state, + &ctx->hp_node); + ctx->cpuhp_added = false; + if (mbedtee_cpuhp_instances) + mbedtee_cpuhp_instances--; + if (!mbedtee_cpuhp_instances) { + cpuhp_remove_multi_state(mbedtee_cpuhp_state); + mbedtee_cpuhp_state = -EINVAL; + } + } + mutex_unlock(&mbedtee_cpuhp_mutex); +err_wq: + destroy_workqueue(ctx->rpc_wq); + ctx->rpc_wq = NULL; +err_shm: + memunmap(ctx->t2r_shm); + ctx->t2r_shm = NULL; +err_ring: + memunmap(ctx->t2r_ring); + ctx->t2r_ring = NULL; + return ret; +} + +void mbedtee_rpc_uninit(struct mbedtee_device *mbedtee) +{ + struct mbedtee_t2r_ctx *ctx; + + if (!mbedtee) + return; + + ctx = &mbedtee->t2r; + /* Stop advertising the REE callee before interrupt teardown. */ + if (ctx->t2r_ring) + WRITE_ONCE(ctx->t2r_ring->callee_ready, false); + + mutex_lock(&mbedtee_cpuhp_mutex); + if (mbedtee_cpuhp_state >= 0 && ctx->cpuhp_added) { + cpuhp_state_remove_instance_nocalls(mbedtee_cpuhp_state, + &ctx->hp_node); + ctx->cpuhp_added = false; + if (mbedtee_cpuhp_instances) + mbedtee_cpuhp_instances--; + if (!mbedtee_cpuhp_instances) { + cpuhp_remove_multi_state(mbedtee_cpuhp_state); + mbedtee_cpuhp_state = -EINVAL; + } + } + mutex_unlock(&mbedtee_cpuhp_mutex); + + if (mbedtee->rpc_ops) + mbedtee->rpc_ops->uninit(mbedtee); + + /* + * Work queued before IRQ teardown may be blocked in the supplicant + * path. Abort those requests and reject later ones before draining the + * workqueue. R2T must stay alive until destroy_workqueue() returns + * because rpc_routine() sends COMPLETE_TEE replies over R2T. + */ + mbedtee_supp_abort_all(&mbedtee->supp); + + if (ctx->rpc_wq) { + destroy_workqueue(ctx->rpc_wq); + ctx->rpc_wq = NULL; + } + + if (ctx->t2r_shm) { + memunmap(ctx->t2r_shm); + ctx->t2r_shm = NULL; + } + + if (ctx->t2r_ring) { + memunmap(ctx->t2r_ring); + ctx->t2r_ring = NULL; + } +} diff --git a/drivers/tee/mbedtee/rpc_callee_arm.c b/drivers/tee/mbedtee/rpc_callee_arm.c new file mode 100644 index 0000000..871bba5 --- /dev/null +++ b/drivers/tee/mbedtee/rpc_callee_arm.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + * ARM/ARM64 GIC transport for the TEE->REE RPC callee. + * + * On ARM/ARM64 the TEE raises a rising-edge software-generated interrupt + * described by the "interrupts" property of the mbedtee DT node. This file + * obtains that virq via of_irq_get() and registers the hard IRQ handler + * supplied by the core callee layer. + */ +#include <linux/interrupt.h> +#include <linux/cpu.h> +#include <linux/of.h> +#include <linux/of_irq.h> + +#include "mbedtee_drv.h" + +static int arm_transport_init(struct mbedtee_device *mbedtee, + struct rpc_ringbuf *ring, irq_handler_t handler) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + struct mbedtee_rpc_transport_ctx *tctx = &mbedtee->transport; + int ret; + + tctx->rpc_notify_virq = of_irq_get(mbedtee->dev->of_node, 0); + if (tctx->rpc_notify_virq <= 0) + return tctx->rpc_notify_virq ? tctx->rpc_notify_virq : -ENODEV; + + ret = request_irq(tctx->rpc_notify_virq, handler, + 0, "mbedtee-rpc", mbedtee); + if (ret) { + dev_warn(mbedtee->dev, "request_irq %d failed: %d\n", + tctx->rpc_notify_virq, ret); + tctx->rpc_notify_virq = 0; + return ret; + } + + /* + * Spread the T2R SPI across all online CPUs in Linux. + * The TEE needs no CPU information from Linux: it broadcasts + * via GIC hardware (GICv2 ITARGETS=0xFF / GICv3 IROUTER.IRM=1). + */ + cpumask_copy(&ctx->callee_cpus, cpu_online_mask); + if (irq_set_affinity(tctx->rpc_notify_virq, &ctx->callee_cpus)) + dev_warn(mbedtee->dev, "irq_set_affinity failed\n"); + + dev_dbg(mbedtee->dev, "t2r-irq %d\n", tctx->rpc_notify_virq); + return 0; +} + +static void arm_transport_uninit(struct mbedtee_device *mbedtee) +{ + struct mbedtee_rpc_transport_ctx *tctx = &mbedtee->transport; + + if (tctx->rpc_notify_virq > 0) { + free_irq(tctx->rpc_notify_virq, mbedtee); + tctx->rpc_notify_virq = 0; + } +} + +/* + * ARM T2R uses a GIC SPI: the TEE broadcasts it via GIC hardware + * (GICv2 ITARGETS=0xFF or GICv3 IROUTER.IRM=1) to any alive CPU. + * TrustZone shares physical CPUs -- no ring update is ever needed. + * + * @new_cpu is ignored: the IRQ is re-affined to ctx->callee_cpus which + * the core callee layer keeps in sync (dying CPU already removed before + * this callback is invoked, so the mask is always accurate). + */ +static int arm_update_affinity(struct mbedtee_device *mbedtee, + unsigned int new_cpu) +{ + struct mbedtee_rpc_transport_ctx *tctx = &mbedtee->transport; + + if (tctx->rpc_notify_virq > 0 && + irq_set_affinity(tctx->rpc_notify_virq, &mbedtee->t2r.callee_cpus)) + dev_warn(mbedtee->dev, "irq_set_affinity failed\n"); + + return 0; +} + +static const struct rpc_transport_ops arm_transport_ops = { + .init = arm_transport_init, + .uninit = arm_transport_uninit, + .update_affinity = arm_update_affinity, +}; + +const struct rpc_transport_ops *mbedtee_get_rpc_transport_ops(void) +{ + return &arm_transport_ops; +} diff --git a/drivers/tee/mbedtee/rpc_callee_riscv.c b/drivers/tee/mbedtee/rpc_callee_riscv.c new file mode 100644 index 0000000..7ac0f8e --- /dev/null +++ b/drivers/tee/mbedtee/rpc_callee_riscv.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2025 Xing Loong xing.xl.loong@gmail.com + * RISC-V MSI transport for the TEE->REE RPC callee. + * + * On RISC-V the TEE wakes the REE by writing a Message Signalled Interrupt + * into the target hart's IMSIC (Incoming MSI Controller). This file allocates + * one platform MSI from the DT-provided MSI parent and registers the hard IRQ + * handler supplied by the core callee layer. + * + * CPU hotplug: the common mbedtee_cpu_offline() callback in rpc_callee.c + * detects when the callee CPU goes offline and calls riscv_update_affinity() + * to migrate the MSI to another online CPU. + */ +#include <linux/interrupt.h> +#include <linux/msi.h> +#include <linux/of_irq.h> +#include <linux/smp.h> + +#include "mbedtee_drv.h" + +static int mbedtee_ring_set_hartid(struct mbedtee_device *mbedtee, + struct rpc_ringbuf *ring, + unsigned int cpu) +{ + long hartid = cpuid_to_hartid_map(cpu); + + if (hartid < 0) { + dev_err(mbedtee->dev, "CPU%u has no valid hart-id\n", cpu); + return -ERANGE; + } + + WRITE_ONCE(ring->callee_hartid, (u32)hartid); + return 0; +} + +static void mbedtee_rpc_write_msi_msg(struct msi_desc *desc_msi, + struct msi_msg *msg) +{ + struct mbedtee_device *mbedtee = dev_get_drvdata(desc_msi->dev); + + if (mbedtee) + mbedtee->transport.rpc_msi_msg = *msg; +} + +static int riscv_transport_init(struct mbedtee_device *mbedtee, + struct rpc_ringbuf *ring, irq_handler_t handler) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + const struct cpumask *eff; + struct mbedtee_rpc_transport_ctx *tctx = &mbedtee->transport; + unsigned int cpu; + struct device *dev = mbedtee->dev; + int virq; + int ret; + + /* + * Set a bootstrap callee_hartid (hart 0) so the TEE can poll + * even if MSI setup fails below. + */ + ret = mbedtee_ring_set_hartid(mbedtee, ring, 0); + if (ret) + return ret; + + dev_set_drvdata(dev, mbedtee); + + /* + * The MSI domain of an OF device is resolved only once, when the + * platform device is created (of_msi_configure() in of/platform.c). + * mbedtee's MSI parent is the IMSIC, whose MSI domain is created + * later, when the IMSIC builtin_platform_driver probes -- typically + * after this device has already been created with a NULL msi.domain. + * + * Deferred probing alone cannot recover from this: the driver core + * re-runs probe() but never re-runs of_msi_configure(), so the stale + * NULL domain would persist across every retry. Re-resolve it here + * and defer until the IMSIC driver is up. This mirrors the RISC-V + * APLIC/IOMMU platform-MSI drivers. + */ + if (!dev_get_msi_domain(dev)) { + of_msi_configure(dev, dev->of_node); + + if (!dev_get_msi_domain(dev)) + return -EPROBE_DEFER; + } + + ret = platform_device_msi_init_and_alloc_irqs(dev, 1, + mbedtee_rpc_write_msi_msg); + if (ret) { + dev_err(mbedtee->dev, "MSI alloc failed: %d\n", ret); + return ret; + } + + virq = msi_get_virq(dev, 0); + if (virq <= 0) { + dev_err(mbedtee->dev, "no MSI virq\n"); + ret = -ENOENT; + goto err_msi; + } + + ret = request_irq(virq, handler, 0, "mbedtee-rpc", mbedtee); + if (ret) { + dev_err(mbedtee->dev, "request_irq %d failed: %d\n", virq, ret); + goto err_msi; + } + + eff = irq_get_effective_affinity_mask(virq); + cpu = eff ? cpumask_first(eff) : 0; + + dev_dbg(mbedtee->dev, "MSI addr 0x%x%08x data %d virq %d hart %ld\n", + tctx->rpc_msi_msg.address_hi, tctx->rpc_msi_msg.address_lo, + tctx->rpc_msi_msg.data, virq, cpuid_to_hartid_map(cpu)); + + /* Inform TEE of the IMSIC identity used for T2R notifications. */ + ret = mbedtee_ring_set_hartid(mbedtee, ring, cpu); + if (ret) + goto err_irq; + /* Ensure callee_hartid is visible before advertising MSI interrupt ID. */ + smp_store_release(&ring->callee_imsic_id, tctx->rpc_msi_msg.data); + + /* Track the active callee CPU for hotplug migration. */ + ctx->callee_virq = virq; + cpumask_set_cpu(cpu, &ctx->callee_cpus); + + return 0; + +err_irq: + free_irq(virq, mbedtee); + +err_msi: + platform_device_msi_free_irqs_all(dev); + return ret; +} + +static void riscv_transport_uninit(struct mbedtee_device *mbedtee) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + int virq; + + virq = ctx->callee_virq; + ctx->callee_virq = 0; + if (virq > 0) + free_irq(virq, mbedtee); + + platform_device_msi_free_irqs_all(mbedtee->dev); +} + +/* + * Migrate the IMSIC MSI delivery to @new_cpu. + * + * Ordering guarantee for the TEE reader: + * 1. Clear callee_imsic_id to 0 -- TEE skips IMSIC path while we migrate. + * 2. Call irq_set_affinity() -- triggers mbedtee_rpc_write_msi_msg() which + * updates tctx->rpc_msi_msg with the new IMSIC identity. + * 3. Update callee_hartid (WRITE_ONCE inside mbedtee_ring_set_hartid()); + * no explicit barrier needed here since the release store on + * callee_imsic_id in step 4 provides the ordering. + * 4. Publish new callee_imsic_id with smp_store_release -- TEE's + * smp_load_acquire on callee_imsic_id pairs with this store. + */ +static int riscv_update_affinity(struct mbedtee_device *mbedtee, + unsigned int new_cpu) +{ + struct mbedtee_t2r_ctx *ctx = &mbedtee->t2r; + struct mbedtee_rpc_transport_ctx *tctx = &mbedtee->transport; + struct rpc_ringbuf *ring = ctx->t2r_ring; + int virq = ctx->callee_virq; + + if (!virq) + return -ENODEV; + + /* Step 1: prevent TEE from using the stale IMSIC identity. */ + smp_store_release(&ring->callee_imsic_id, 0); + + /* Step 2: retarget the MSI; write_msi_msg callback updates rpc_msi_msg. */ + if (irq_set_affinity(virq, cpumask_of(new_cpu))) { + dev_warn(mbedtee->dev, "irq_set_affinity to CPU%u failed\n", + new_cpu); + return -EIO; + } + + /* Step 3: update callee_hartid. */ + if (mbedtee_ring_set_hartid(mbedtee, ring, new_cpu)) + return -ERANGE; + + /* Step 4: publish new IMSIC id with release barrier. */ + smp_store_release(&ring->callee_imsic_id, tctx->rpc_msi_msg.data); + + dev_dbg(mbedtee->dev, "T2R callee migrated to CPU%u (hart %ld)\n", + new_cpu, cpuid_to_hartid_map(new_cpu)); + return 0; +} + +static const struct rpc_transport_ops riscv_transport_ops = { + .init = riscv_transport_init, + .uninit = riscv_transport_uninit, + .update_affinity = riscv_update_affinity, +}; + +const struct rpc_transport_ops *mbedtee_get_rpc_transport_ops(void) +{ + return &riscv_transport_ops; +} diff --git a/drivers/tee/mbedtee/rpc_caller.c b/drivers/tee/mbedtee/rpc_caller.c new file mode 100644 index 0000000..1ae55db --- /dev/null +++ b/drivers/tee/mbedtee/rpc_caller.c @@ -0,0 +1,532 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + * REE->TEE session management and yield-call interface. + */ +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/device.h> +#include "mbedtee_drv.h" + +#define MBEDTEE_RPC_CALL_ACTIVE 0 +#define MBEDTEE_RPC_CALL_DONE 1 +#define MBEDTEE_RPC_CALL_INTERRUPTED 2 + +int mbedtee_rpc_call_alloc(struct mbedtee_device *mbedtee, + size_t payload_size, struct mbedtee_rpc_call **call) +{ + struct mbedtee_rpc_call *rcall; + unsigned long rpc_index; + int ret; + + if (sizeof(*rcall) + payload_size > PAGE_SIZE) + return -E2BIG; + + rcall = kzalloc(sizeof(*rcall) + payload_size, GFP_KERNEL); + if (!rcall) + return -ENOMEM; + + init_completion(&rcall->c); + rcall->state = MBEDTEE_RPC_CALL_ACTIVE; + rcall->rpc.size = payload_size; + rcall->rpc.ret = -EOPNOTSUPP; + rcall->rpc_phys = mbedtee_virt_to_phys(&rcall->rpc); + + do { + rpc_index = atomic_long_inc_return(&mbedtee->rpc_call_seq); + } while (rpc_index == 0); + + ret = xa_insert_irq(&mbedtee->rpc_calls, rpc_index, rcall, GFP_KERNEL); + if (ret != 0) { + kfree(rcall); + return ret; + } + + rcall->rpc.waiter_id = rpc_index; + *call = rcall; + + return 0; +} + +void mbedtee_rpc_call_free(struct mbedtee_device *mbedtee, + struct mbedtee_rpc_call *call) +{ + unsigned long rpc_index; + + if (!call) + return; + + rpc_index = (unsigned long)call->rpc.waiter_id; + + /* + * If interrupted/completed, complete_call owns this allocation + * and will xa_erase + kfree when the TEE eventually finishes. + */ + if (READ_ONCE(call->state) == MBEDTEE_RPC_CALL_INTERRUPTED) + return; + + xa_erase_irq(&mbedtee->rpc_calls, rpc_index); + kfree(call); +} + +void mbedtee_rpc_complete_call(struct mbedtee_device *mbedtee, + u64 waiter_id) +{ + struct mbedtee_rpc_call *call; + unsigned long rpc_index; + unsigned long flags; + unsigned int state; + + rpc_index = (unsigned long)waiter_id; + if ((u64)rpc_index != waiter_id) + return; + + xa_lock_irqsave(&mbedtee->rpc_calls, flags); + call = xa_load(&mbedtee->rpc_calls, rpc_index); + if (!call) { + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); + return; + } + + state = cmpxchg(&call->state, MBEDTEE_RPC_CALL_ACTIVE, + MBEDTEE_RPC_CALL_DONE); + __xa_erase(&mbedtee->rpc_calls, rpc_index); + + if (state == MBEDTEE_RPC_CALL_INTERRUPTED) { + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); + kfree(call); + return; + } + + complete(&call->c); + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); +} + +long mbedtee_rpc_wait_for_completion(struct mbedtee_device *mbedtee, + struct mbedtee_rpc_call *call, bool killable) +{ + long ret; + unsigned int state; + unsigned long flags; + unsigned long rpc_index; + + if (!killable) { + wait_for_completion(&call->c); + return 0; + } + + rpc_index = (unsigned long)call->rpc.waiter_id; + + ret = wait_for_completion_killable(&call->c); + if (ret == 0) + return 0; + + /* + * Synchronize with mbedtee_rpc_complete_call() via the + * xa_lock. If complete_call already consumed this entry + * before we acquired the lock, the entry is already gone + * from the xarray and the TEE already completed (or freed) + * the call -- treat as success since the RPC is finished. + * If the entry is still present, we hold the lock so + * complete_call cannot race with our state transition. + */ + xa_lock_irqsave(&mbedtee->rpc_calls, flags); + if (xa_load(&mbedtee->rpc_calls, rpc_index) != call) { + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); + return 0; + } + + state = cmpxchg(&call->state, MBEDTEE_RPC_CALL_ACTIVE, + MBEDTEE_RPC_CALL_INTERRUPTED); + if (state == MBEDTEE_RPC_CALL_DONE) { + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); + return 0; + } + + if (state == MBEDTEE_RPC_CALL_ACTIVE) + /* Publish interruption state before the TEE waiter reads it. */ + smp_store_release(&call->rpc.interrupted, true); + + xa_unlock_irqrestore(&mbedtee->rpc_calls, flags); + return ret; +} + +/* Local helpers for encoding/decoding the 4-bit-per-parameter type field. */ +static inline u32 mbedtee_param_type_get(u32 types, unsigned int idx) +{ + return (types >> (idx * 4)) & 0xF; +} + +static inline u32 mbedtee_param_type_set(u32 type, unsigned int idx) +{ + return (type & 0xF) << (idx * 4); +} + +static int mbedtee_param_decode(struct tee_param *params, + size_t num_params, const struct rpc_param *rp) +{ + size_t n; + + if (num_params > ARRAY_SIZE(rp->params)) + return -EINVAL; + + for (n = 0; n < num_params; n++) { + struct tee_param *p = params + n; + const union rpc_tee_param *rtp = rp->params + n; + u32 attr = mbedtee_param_type_get(rp->params_type, n); + + switch (attr) { + case TEE_IOCTL_PARAM_ATTR_TYPE_NONE: + memset(&p->u, 0, sizeof(p->u)); + break; + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT: + p->u.value.a = rtp->value.a; + p->u.value.b = rtp->value.b; + break; + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: + p->u.memref.size = rtp->memref.size; + break; + default: + return -EINVAL; + } + p->attr = attr; + } + return 0; +} + +static int mbedtee_param_encode(struct rpc_param *rp, + size_t num_params, const struct tee_param *params) +{ + size_t n; + + if (num_params > ARRAY_SIZE(rp->params)) + return -EINVAL; + + rp->params_type = TEE_IOCTL_PARAM_ATTR_TYPE_NONE; + + for (n = 0; n < num_params; n++) { + const struct tee_param *p = params + n; + union rpc_tee_param *rtp = rp->params + n; + + rp->params_type |= mbedtee_param_type_set(p->attr, n); + + switch (p->attr) { + case TEE_IOCTL_PARAM_ATTR_TYPE_NONE: + memset(rtp, 0, sizeof(*rtp)); + break; + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT: + rtp->value.a = p->u.value.a; + rtp->value.b = p->u.value.b; + break; + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: + if (p->u.memref.shm) + rtp->memref.id = p->u.memref.shm->sec_world_id; + else + rtp->memref.id = 0; /* invalid-id @ mbedtee */ + rtp->memref.size = p->u.memref.size; + rtp->memref.offset = p->u.memref.shm_offs; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +/* + * cancel_req() and shm_{register,unregister} still return Linux errno to the + * kernel TEE core. Preserve any local transport failure in @ret; otherwise + * fold a non-success TEE-side GP status into the generic -EIO expected by + * these internal-only hooks. + */ +static int mbedtee_rpc_gp_ret_to_errno(int ret, s32 gp_ret) +{ + if (ret) + return ret; + + return gp_ret == TEEC_SUCCESS ? 0 : -EIO; +} + +static struct mbedtee_session * +mbedtee_find_session_locked(struct mbedtee_context_data *ctxdata, + u32 session_id) +{ + struct mbedtee_session *sess; + + list_for_each_entry(sess, &ctxdata->sess_list, list_node) + if (sess->session_id == session_id) + return sess; + + return NULL; +} + +int mbedtee_open_session(struct tee_context *ctx, + struct tee_ioctl_open_session_arg *arg, + struct tee_param *param) +{ + int ret; + u32 session_id = 0; + struct mbedtee_context_data *ctxdata = ctx->data; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_param *rp; + struct mbedtee_session *sess; + + sess = kzalloc_obj(*sess, GFP_KERNEL); + if (!sess) + return -ENOMEM; + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*rp), &call); + if (ret != 0) { + kfree(sess); + return ret; + } + + rp = (struct rpc_param *)call->rpc.data; + + ret = mbedtee_param_encode(rp, arg->num_params, param); + if (ret) { + kfree(sess); + mbedtee_rpc_call_free(mbedtee, call); + return ret; + } + + memcpy(rp->uuid, arg->uuid, sizeof(arg->uuid)); + memcpy(rp->clnt_uuid, arg->clnt_uuid, sizeof(arg->clnt_uuid)); + rp->ret_origin = TEEC_ORIGIN_COMMS; + + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_OPEN_SESSION, call, false); + + dev_dbg(mbedtee->dev, "open session ret %d gp_ret %d\n", ret, + call->rpc.ret); + + if (ret == 0 && call->rpc.ret == TEEC_SUCCESS) { + session_id = rp->session_id; + sess->session_id = session_id; + mutex_lock(&ctxdata->mutex); + list_add(&sess->list_node, &ctxdata->sess_list); + mutex_unlock(&ctxdata->mutex); + } else { + kfree(sess); + } + + if (ret != 0) { + arg->ret = TEEC_ERROR_COMMUNICATION; + arg->ret_origin = TEEC_ORIGIN_COMMS; + } else if (mbedtee_param_decode(param, arg->num_params, rp)) { + arg->ret = TEEC_ERROR_COMMUNICATION; + arg->ret_origin = TEEC_ORIGIN_COMMS; + if (call->rpc.ret == TEEC_SUCCESS) + mbedtee_close_session(ctx, session_id); + } else { + arg->session = rp->session_id; + arg->ret = (u32)call->rpc.ret; + arg->ret_origin = rp->ret_origin; + } + + mbedtee_rpc_call_free(mbedtee, call); + return 0; +} + +int mbedtee_invoke_func(struct tee_context *ctx, + struct tee_ioctl_invoke_arg *arg, + struct tee_param *param) +{ + int ret; + struct mbedtee_context_data *ctxdata = ctx->data; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_param *rp; + struct mbedtee_session *sess; + + mutex_lock(&ctxdata->mutex); + sess = mbedtee_find_session_locked(ctxdata, arg->session); + mutex_unlock(&ctxdata->mutex); + if (!sess) + return -EINVAL; + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*rp), &call); + if (ret != 0) + return ret; + + rp = (struct rpc_param *)call->rpc.data; + + rp->session_id = arg->session; + rp->cmd_id = arg->func; + rp->ret_origin = TEEC_ORIGIN_COMMS; + + ret = mbedtee_param_encode(rp, arg->num_params, param); + if (ret) { + mbedtee_rpc_call_free(mbedtee, call); + return ret; + } + + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_INVOKE_SESSION, call, true); + + dev_dbg(mbedtee->dev, "invoke session ret %d gp_ret %d\n", ret, + call->rpc.ret); + + if (ret != 0) { + arg->ret = TEEC_ERROR_COMMUNICATION; + arg->ret_origin = TEEC_ORIGIN_COMMS; + } else if (mbedtee_param_decode(param, arg->num_params, rp)) { + arg->ret = TEEC_ERROR_COMMUNICATION; + arg->ret_origin = TEEC_ORIGIN_COMMS; + } else { + arg->ret = (u32)call->rpc.ret; + arg->ret_origin = rp->ret_origin; + } + + mbedtee_rpc_call_free(mbedtee, call); + return 0; +} + +int mbedtee_close_session(struct tee_context *ctx, u32 session) +{ + int ret; + struct mbedtee_context_data *ctxdata = ctx->data; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_param *rp; + struct mbedtee_session *sess; + + mutex_lock(&ctxdata->mutex); + sess = mbedtee_find_session_locked(ctxdata, session); + if (!sess) { + mutex_unlock(&ctxdata->mutex); + return -EINVAL; + } + + list_del(&sess->list_node); + mutex_unlock(&ctxdata->mutex); + kfree(sess); + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*rp), &call); + if (ret != 0) + return ret; + + rp = (struct rpc_param *)call->rpc.data; + rp->session_id = session; + + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_CLOSE_SESSION, call, false); + + mbedtee_rpc_call_free(mbedtee, call); + + return ret; +} + +int mbedtee_cancel_req(struct tee_context *ctx, + u32 cancel_id, u32 session) +{ + int ret; + struct mbedtee_context_data *ctxdata = ctx->data; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_cancel_req *cancel; + struct mbedtee_session *sess; + + mutex_lock(&ctxdata->mutex); + sess = mbedtee_find_session_locked(ctxdata, session); + mutex_unlock(&ctxdata->mutex); + if (!sess) + return -EINVAL; + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*cancel), &call); + if (ret != 0) + return ret; + + cancel = (struct rpc_cancel_req *)call->rpc.data; + cancel->session_id = session; + cancel->cancel_id = cancel_id; + + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_CANCEL, call, false); + ret = mbedtee_rpc_gp_ret_to_errno(ret, call->rpc.ret); + + mbedtee_rpc_call_free(mbedtee, call); + + return ret; +} + +int mbedtee_shm_register(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t nr_pages, unsigned long start) +{ + int ret; + size_t i, j; + u64 *pagearray; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_memref *memref; + /* Multiple: number of MBEDTEE_PAGE_SIZE pages per Linux page. */ + const size_t multiple = PAGE_SIZE / MBEDTEE_PAGE_SIZE; + + BUILD_BUG_ON(PAGE_SIZE < MBEDTEE_PAGE_SIZE); + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*memref), &call); + if (ret != 0) + return ret; + + memref = (struct rpc_memref *)call->rpc.data; + + pagearray = kcalloc(nr_pages * multiple, sizeof(*pagearray), GFP_KERNEL); + if (!pagearray) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < nr_pages; i++) { + for (j = 0; j < multiple; j++) + pagearray[i * multiple + j] = MBEDTEE_PAGE_SIZE * j + + page_to_phys(pages[i]); + } + + memref->size = tee_shm_get_size(shm); + memref->offset = tee_shm_get_page_offset(shm); + memref->pages = mbedtee_virt_to_phys(pagearray); + memref->cnt = nr_pages * multiple; + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_REGISTER_SHM, call, false); + ret = mbedtee_rpc_gp_ret_to_errno(ret, call->rpc.ret); + + if (ret == 0) + shm->sec_world_id = memref->id; + + kfree(pagearray); + +out: + mbedtee_rpc_call_free(mbedtee, call); + return ret; +} + +int mbedtee_shm_unregister(struct tee_context *ctx, + struct tee_shm *shm) +{ + int ret; + struct mbedtee_device *mbedtee = tee_get_drvdata(ctx->teedev); + struct mbedtee_rpc_call *call; + struct rpc_memref *memref; + + ret = mbedtee_rpc_call_alloc(mbedtee, sizeof(*memref), &call); + if (ret != 0) + return ret; + + memref = (struct rpc_memref *)call->rpc.data; + memref->id = shm->sec_world_id; + + ret = mbedtee_rpc_yieldcall(mbedtee, MBEDTEE_RPC_UNREGISTER_SHM, call, false); + ret = mbedtee_rpc_gp_ret_to_errno(ret, call->rpc.ret); + + mbedtee_rpc_call_free(mbedtee, call); + + return ret; +} diff --git a/drivers/tee/mbedtee/rpc_caller_arm.c b/drivers/tee/mbedtee/rpc_caller_arm.c new file mode 100644 index 0000000..1dd665a --- /dev/null +++ b/drivers/tee/mbedtee/rpc_caller_arm.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + * ARM RPC calls to TEE - relies on SMC + * + * Uses arm_smccc_smc() with SMCCC-compatible calling convention: + * Fast call : r0/x0 = fn (bit 31 set), r1-r3/x1-x3 = args. + * Yield call : r0/x0 = fn (bit 31 clear), r1/x1 = phys(rpc_cmd). + * + * ARM fast calls are synchronous SMC instructions. + */ +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/arm-smccc.h> +#include "mbedtee_drv.h" + +long mbedtee_rpc_yieldcall(struct mbedtee_device *mbedtee, + unsigned long fn, struct mbedtee_rpc_call *call, + bool interruptible) +{ + long ret; + struct arm_smccc_res res; + + if (MBEDTEE_RPC_IS_FASTCALL(fn)) + return -EINVAL; + + call->rpc.id = fn; + + arm_smccc_smc(fn, call->rpc_phys, + 0, 0, 0, 0, 0, 0, &res); + ret = res.a0; + if (ret != 0) + return ret; + + return mbedtee_rpc_wait_for_completion(mbedtee, call, interruptible); +} + +long mbedtee_rpc_fastcall(struct mbedtee_device *mbedtee, + unsigned long fn, unsigned long a0, + unsigned long a1, unsigned long a2) +{ + struct arm_smccc_res res; + + if (!MBEDTEE_RPC_IS_FASTCALL(fn)) + return -EINVAL; + + arm_smccc_smc(fn, a0, a1, a2, 0, 0, 0, 0, &res); + + return (long)res.a0; +} + +/* + * ARM uses direct SMC; no caller-side ring buffer initialisation needed. + */ +int mbedtee_r2t_init(struct mbedtee_device *mbedtee) +{ + return 0; +} + +void mbedtee_r2t_uninit(struct mbedtee_device *mbedtee) +{ +} diff --git a/drivers/tee/mbedtee/rpc_caller_riscv.c b/drivers/tee/mbedtee/rpc_caller_riscv.c new file mode 100644 index 0000000..387d9bb --- /dev/null +++ b/drivers/tee/mbedtee/rpc_caller_riscv.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2025 Xing Loong xing.xl.loong@gmail.com + * REE->TEE RPC calls for RISC-V (IMSIC) + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/sizes.h> + +#include "mbedtee_drv.h" + +static bool rpc_ring_enough(struct mbedtee_r2t_ctx *ctx, size_t size) +{ + u32 wr; + u32 rd; + u32 remain; + + wr = READ_ONCE(ctx->ring_wr); + /* Pair with callee release store when publishing ring->rd */ + rd = smp_load_acquire(&ctx->ring->rd); + + if (rd > ctx->ring_sz || wr > ctx->ring_sz) + return false; + + if (rd <= wr) + remain = ctx->ring_sz + rd - wr; + else + remain = rd - wr; + + return remain > size; +} + +static void rpc_ring_write(struct mbedtee_r2t_ctx *ctx, + void *data, size_t size) +{ + struct rpc_ringbuf *shm = ctx->ring; + u32 remain; + u32 wr = READ_ONCE(ctx->ring_wr); + + if (wr + size > ctx->ring_sz) { + remain = wr + size - ctx->ring_sz; + memcpy(&shm->mem[wr], data, size - remain); + memcpy(&shm->mem[0], (char *)data + size - remain, remain); + wr = remain; + } else { + memcpy(&shm->mem[wr], data, size); + wr += size; + } + + WRITE_ONCE(ctx->ring_wr, wr); + /* Publish writer index after payload bytes become visible. */ + smp_store_release(&shm->wr, wr); +} + +long mbedtee_rpc_yieldcall(struct mbedtee_device *mbedtee, + unsigned long fn, struct mbedtee_rpc_call *call, + bool interruptible) +{ + struct mbedtee_r2t_ctx *ctx = &mbedtee->r2t; + unsigned long flags; + u64 phys; + + if (!ctx->ring) + return -ENXIO; + + if (MBEDTEE_RPC_IS_FASTCALL(fn)) + return -EINVAL; + + call->rpc.id = fn; + + spin_lock_irqsave(&ctx->lock, flags); + if (!rpc_ring_enough(ctx, sizeof(u64))) { + dev_err_ratelimited(mbedtee->dev, "rpc ring full\n"); + spin_unlock_irqrestore(&ctx->lock, flags); + return -ENOSPC; + } + + phys = call->rpc_phys; + rpc_ring_write(ctx, &phys, sizeof(phys)); + spin_unlock_irqrestore(&ctx->lock, flags); + + return mbedtee_rpc_wait_for_completion(mbedtee, call, interruptible); +} + +long mbedtee_rpc_fastcall(struct mbedtee_device *mbedtee, + unsigned long fn, unsigned long a0, + unsigned long a1, unsigned long a2) +{ + struct mbedtee_r2t_ctx *ctx = &mbedtee->r2t; + struct mbedtee_rpc_call *call; + unsigned long flags; + u64 phys; + int ret; + + if (!ctx->ring) + return -ENXIO; + + if (!MBEDTEE_RPC_IS_FASTCALL(fn)) + return -EINVAL; + + ret = mbedtee_rpc_call_alloc(mbedtee, 3 * sizeof(u64), &call); + if (ret != 0) + return ret; + + call->rpc.id = fn; + call->rpc.size = 3 * sizeof(u64); + call->rpc.data[0] = a0; + call->rpc.data[1] = a1; + call->rpc.data[2] = a2; + + spin_lock_irqsave(&ctx->lock, flags); + if (!rpc_ring_enough(ctx, sizeof(u64))) { + dev_err_ratelimited(mbedtee->dev, "rpc ring full\n"); + spin_unlock_irqrestore(&ctx->lock, flags); + mbedtee_rpc_call_free(mbedtee, call); + return -ENOSPC; + } + + phys = call->rpc_phys; + rpc_ring_write(ctx, &phys, sizeof(phys)); + spin_unlock_irqrestore(&ctx->lock, flags); + + ret = mbedtee_rpc_wait_for_completion(mbedtee, call, true); + if (ret != 0) { + mbedtee_rpc_call_free(mbedtee, call); + return ret; + } + + ret = call->rpc.ret; + mbedtee_rpc_call_free(mbedtee, call); + + return ret; +} + +int mbedtee_r2t_init(struct mbedtee_device *mbedtee) +{ + struct mbedtee_r2t_ctx *ctx = &mbedtee->r2t; + struct device_node *node = mbedtee->dev->of_node; + struct resource res; + int ret; + + memset(ctx, 0, sizeof(*ctx)); + spin_lock_init(&ctx->lock); + + ret = mbedtee_get_resource(node, "r2t-ring", &res); + if (ret) + return ret; + + if (resource_size(&res) <= sizeof(struct rpc_ringbuf)) { + dev_err(mbedtee->dev, "r2t-ring too small\n"); + return -EINVAL; + } + + ctx->ring = memremap(res.start, resource_size(&res), + MEMREMAP_WB); + if (!ctx->ring) { + dev_err(mbedtee->dev, "failed to map r2t ring at %pa\n", + &res.start); + return -ENOMEM; + } + ctx->ring_sz = resource_size(&res) - sizeof(struct rpc_ringbuf); + /* Read initial writer index with acquire for coherent ring bootstrap. */ + WRITE_ONCE(ctx->ring_wr, smp_load_acquire(&ctx->ring->wr)); + + dev_dbg(mbedtee->dev, "r2t-ring %pa\n", &res.start); + + return 0; +} + +void mbedtee_r2t_uninit(struct mbedtee_device *mbedtee) +{ + struct mbedtee_r2t_ctx *ctx; + + if (!mbedtee) + return; + + ctx = &mbedtee->r2t; + if (ctx->ring) { + memunmap(ctx->ring); + ctx->ring = NULL; + ctx->ring_sz = 0; + ctx->ring_wr = 0; + } +} diff --git a/drivers/tee/mbedtee/shm_pool.c b/drivers/tee/mbedtee/shm_pool.c new file mode 100644 index 0000000..708ab24 --- /dev/null +++ b/drivers/tee/mbedtee/shm_pool.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2017, EPAM Systems + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + */ +#include <linux/device.h> +#include <linux/genalloc.h> +#include <linux/slab.h> + +#include "mbedtee_drv.h" + +static int pool_op_alloc(struct tee_shm_pool *pool, + struct tee_shm *shm, size_t size, size_t align) +{ + unsigned int order = get_order(size); + struct page *page; + int rc = 0; + + page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); + if (!page) + return -ENOMEM; + + shm->kaddr = page_address(page); + shm->paddr = page_to_phys(page); + shm->size = PAGE_SIZE << order; + + if (!(shm->flags & TEE_SHM_PRIV)) { + struct mbedtee_device *mbedtee = tee_get_drvdata(shm->ctx->teedev); + + if (mbedtee->yield) { + unsigned int nr_pages = 1 << order; + unsigned int i; + struct page **pages; + + pages = kmalloc_array(nr_pages, sizeof(*pages), GFP_KERNEL); + if (!pages) { + rc = -ENOMEM; + goto err_pages; + } + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + + rc = mbedtee_shm_register(shm->ctx, shm, pages, + nr_pages, + (unsigned long)shm->kaddr); + kfree(pages); + if (rc) + goto err_pages; + } + } + + return 0; + +err_pages: + free_pages((unsigned long)shm->kaddr, get_order(shm->size)); + shm->kaddr = NULL; + return rc; +} + +static void pool_op_free(struct tee_shm_pool *pool, + struct tee_shm *shm) +{ + if (!(shm->flags & TEE_SHM_PRIV)) { + struct mbedtee_device *mbedtee = tee_get_drvdata(shm->ctx->teedev); + + if (mbedtee->yield && shm->sec_world_id) + mbedtee_shm_unregister(shm->ctx, shm); + } + + free_pages((unsigned long)shm->kaddr, get_order(shm->size)); + shm->kaddr = NULL; +} + +static void pool_op_destroy_pool(struct tee_shm_pool *pool) +{ + kfree(pool); +} + +static const struct tee_shm_pool_ops pool_ops = { + .alloc = pool_op_alloc, + .free = pool_op_free, + .destroy_pool = pool_op_destroy_pool, +}; + +/** + * mbedtee_shm_pool_alloc_pages() - create page-based allocator pool + * + * This pool is used when MbedTEE supports dynamic shared memory. Command + * buffers and similar structures are allocated from kernel's own memory. + * + * Return: pointer to a tee_shm_pool or ERR_PTR on failure + */ +struct tee_shm_pool *mbedtee_shm_pool_alloc_pages(void) +{ + struct tee_shm_pool *pool = kzalloc_obj(*pool, GFP_KERNEL); + + if (!pool) + return ERR_PTR(-ENOMEM); + + pool->ops = &pool_ops; + + return pool; +} diff --git a/drivers/tee/mbedtee/shm_pool.h b/drivers/tee/mbedtee/shm_pool.h new file mode 100644 index 0000000..4510676 --- /dev/null +++ b/drivers/tee/mbedtee/shm_pool.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2016, EPAM Systems + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + */ + +#ifndef SHM_POOL_H +#define SHM_POOL_H + +#include <linux/tee_drv.h> + +struct tee_shm_pool *mbedtee_shm_pool_alloc_pages(void); + +#endif diff --git a/drivers/tee/mbedtee/supp.c b/drivers/tee/mbedtee/supp.c new file mode 100644 index 0000000..bc7de22 --- /dev/null +++ b/drivers/tee/mbedtee/supp.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2020 Xing Loong xing.xl.loong@gmail.com + */ +#include <linux/device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +#include "mbedtee_drv.h" + +struct mbedtee_supp_req { + int ret; + u32 func; + + struct list_head node; + struct task_struct *worker; + struct tee_context *ctx; /* owning supplicant context */ + + struct tee_shm *shm; + void *data; + size_t size; + + struct completion c; +}; + +static int mbedtee_supp_check_recv_params(size_t num_params, + struct tee_param *params) +{ + if (num_params != 1) + return -EINVAL; + + if (!tee_param_is_memref(params) || !params->u.memref.shm) + return -EINVAL; + + return 0; +} + +void mbedtee_supp_init(struct mbedtee_supp *supp) +{ + memset(supp, 0, sizeof(*supp)); + mutex_init(&supp->mutex); + init_completion(&supp->reqs_c); + INIT_LIST_HEAD(&supp->reqs); + INIT_LIST_HEAD(&supp->active_reqs); +} + +void mbedtee_supp_uninit(struct mbedtee_supp *supp) +{ + mutex_destroy(&supp->mutex); +} + +static void mbedtee_supp_complete_req(struct mbedtee_supp_req *r) +{ + list_del_init(&r->node); + if (r->shm) + tee_shm_put(r->shm); + r->shm = NULL; + r->ret = TEEC_ERROR_COMMUNICATION; + complete(&r->c); +} + +void mbedtee_supp_release(struct mbedtee_supp *supp, struct tee_context *ctx) +{ + struct mbedtee_supp_req *r, *n; + + mutex_lock(&supp->mutex); + + /* + * Cancel only requests owned by @ctx. Unclaimed requests and + * requests owned by other supplicant contexts are left alone. + */ + list_for_each_entry_safe(r, n, &supp->reqs, node) { + if (r->ctx != ctx) + continue; + mbedtee_supp_complete_req(r); + } + + list_for_each_entry_safe(r, n, &supp->active_reqs, node) { + if (r->ctx != ctx) + continue; + mbedtee_supp_complete_req(r); + } + + if (supp->ctx == ctx) + supp->ctx = NULL; + + mutex_unlock(&supp->mutex); +} + +void mbedtee_supp_abort_all(struct mbedtee_supp *supp) +{ + struct mbedtee_supp_req *r, *n; + + mutex_lock(&supp->mutex); + supp->shutting_down = true; + + list_for_each_entry_safe(r, n, &supp->reqs, node) + mbedtee_supp_complete_req(r); + + list_for_each_entry_safe(r, n, &supp->active_reqs, node) + mbedtee_supp_complete_req(r); + + supp->ctx = NULL; + + mutex_unlock(&supp->mutex); + complete_all(&supp->reqs_c); +} + +static int supp_enqueue_req(struct mbedtee_supp *supp, + struct mbedtee_supp_req *req) +{ + int ret = 0; + + mutex_lock(&supp->mutex); + if (supp->shutting_down) + ret = -ESHUTDOWN; + else + list_add_tail(&req->node, &supp->reqs); + mutex_unlock(&supp->mutex); + + return ret; +} + +/* + * Receive an RPC request from TEE and dispatch it to supplicant. + * Blocks until the supplicant sends back the result. + */ +void mbedtee_supp_handler(struct mbedtee_device *mbedtee, + u32 func, void *data, size_t size) +{ + struct mbedtee_supp *supp = &mbedtee->supp; + struct mbedtee_supp_req *req = kzalloc_obj(*req, GFP_KERNEL); + struct supp_cmd_hdr *cmd = data; + int ret; + + if (!req) { + if (cmd && size >= sizeof(*cmd)) + cmd->ret = TEEC_ERROR_OUT_OF_MEMORY; + return; + } + + init_completion(&req->c); + req->func = func; + req->data = data; + req->size = size; + + ret = supp_enqueue_req(supp, req); + if (ret != 0) { + if (cmd && size >= sizeof(*cmd)) + cmd->ret = TEEC_ERROR_COMMUNICATION; + kfree(req); + return; + } + + /* Wake up the supplicant daemon to handle this request. */ + complete(&supp->reqs_c); + + wait_for_completion(&req->c); + + kfree(req); +} + +static int supp_pop_req(struct mbedtee_supp *supp, + struct mbedtee_supp_req **req) +{ + struct mbedtee_supp_req *r = NULL; + int ret = 0; + + mutex_lock(&supp->mutex); + if (supp->shutting_down) { + ret = -ESHUTDOWN; + goto out; + } + + r = list_first_entry_or_null(&supp->reqs, struct mbedtee_supp_req, node); + + if (r) { + list_del_init(&r->node); + r->worker = current; + list_add_tail(&r->node, &supp->active_reqs); + } + +out: + mutex_unlock(&supp->mutex); + *req = r; + return ret; +} + +/* + * Called by supplicant to receive the next pending request. + */ +int mbedtee_supp_recv(struct tee_context *ctx, + u32 *func, u32 *num_params, struct tee_param *param) +{ + struct tee_device *teedev = ctx->teedev; + struct mbedtee_device *mbedtee = tee_get_drvdata(teedev); + struct mbedtee_supp *supp = &mbedtee->supp; + struct mbedtee_supp_req *req; + struct mbedtee_context_data *d = ctx->data; + struct tee_shm *shm = param->u.memref.shm; + int ret; + + ret = mbedtee_supp_check_recv_params(*num_params, param); + if (ret != 0) + return ret; + + shm = tee_shm_get_from_id(ctx, shm->id); + tee_shm_put(param->u.memref.shm); + if (IS_ERR(shm)) { + param->u.memref.shm = NULL; + return PTR_ERR(shm); + } + param->u.memref.shm = shm; + + d->is_supp_ctx = true; + + while (true) { + ret = supp_pop_req(supp, &req); + if (ret != 0) + goto err; + if (req) + break; + + if (wait_for_completion_interruptible(&supp->reqs_c)) { + ret = -ERESTARTSYS; + goto err; + } + } + + /* Record which supplicant context owns this request. */ + req->ctx = ctx; + + if (req->size > param->u.memref.size) { + /* Return the request to the queue so it isn't lost */ + mutex_lock(&supp->mutex); + list_del(&req->node); + list_add(&req->node, &supp->reqs); + mutex_unlock(&supp->mutex); + ret = -EOVERFLOW; + goto err; + } + + *func = req->func; + req->shm = shm; + + memcpy(shm->kaddr, req->data, req->size); + param->u.memref.size = req->size; + + return 0; + +err: + tee_shm_put(shm); + param->u.memref.shm = NULL; + return ret; +} + +/* + * Called by supplicant to send back the result of a request. + */ +int mbedtee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params, + struct tee_param *param) +{ + struct tee_device *teedev = ctx->teedev; + struct mbedtee_device *mbedtee = tee_get_drvdata(teedev); + struct mbedtee_supp *supp = &mbedtee->supp; + struct mbedtee_supp_req *req; + struct mbedtee_supp_req *_req; + + if (num_params != 1) + return -EINVAL; + + if (!tee_param_is_memref(param)) + return -EINVAL; + + /* + * Find the active request belonging to this worker thread. + * Each worker is identified by its task_struct pointer, which + * was recorded when supp_pop_req() dispatched the request. + */ + mutex_lock(&supp->mutex); + req = NULL; + list_for_each_entry(_req, &supp->active_reqs, node) { + if (_req->worker == current) { + req = _req; + list_del_init(&req->node); + break; + } + } + mutex_unlock(&supp->mutex); + + if (!req) + return -ENOENT; + + if (param->u.memref.size > req->size) { + req->ret = TEEC_ERROR_COMMUNICATION; + } else { + req->ret = ret; + memcpy(req->data, req->shm->kaddr, param->u.memref.size); + } + if (req->shm) + tee_shm_put(req->shm); + req->shm = NULL; + + /* Wake up mbedtee_supp_handler(). */ + complete(&req->c); + + return 0; +} diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 5203977..2d30296 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -60,6 +60,7 @@ #define TEE_IMPL_ID_AMDTEE 2 #define TEE_IMPL_ID_TSTEE 3 #define TEE_IMPL_ID_QTEE 4 +#define TEE_IMPL_ID_MBEDTEE 5

/* * OP-TEE specific capabilities