- TF-A - lists.trustedfirmware.org

[PATCHv4 0/2] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

v4: rework patches accodring to Peter Maydells comments: - split patches on gpio-pwr driver and arm-virt integration. - start secure gpio only from virt-6.0. - rework qemu interface for gpio-pwr to use 2 named gpio. - put secure gpio to secure name space. v3: added missed include qemu/log.h for qemu_log(.. v2: replace printf with qemu_log (Philippe Mathieu-Daudé) This patch works together with ATF patch: https://github.com/muvarov/arm-trusted-firmware/commit/dd4401d8eb8e0f3018b3… Previus discussion for reboot issue was here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg757705.html Maxim Uvarov (2): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: add secure pl061 for reset/power down hw/arm/Kconfig | 1 + hw/arm/virt.c | 40 +++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 3 ++ 6 files changed, 118 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c -- 2.17.1

3 years, 9 months

4
14
0 0

Cancelled event with note: TF-A Tech Forum @ Thu 14 Jan 2021 16:00 - 17:00 (GMT) (tf-a@lists.trustedfirmware.org)

by Bill Fletcher

This event has been cancelled with this note: "Cancelled - see the mail from Joanna for more details" Title: TF-A Tech Forum We run an open technical forum call for anyone to participate and it is not restricted to Trusted Firmware project members. It will operate under the guidance of the TF TSC. Feel free to forward this invite to colleagues. Invites are via the TF-A mailing list and also published on the Trusted Firmware website. Details are here: https://www.trustedfirmware.org/meetings/tf-a-technical-forum/Tr… Firmware is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://zoom.us/j/9159704974Meeting ID: 915 970 4974One tap mobile+16465588656,,9159704974# US (New York)+16699009128,,9159704974# US (San Jose)Dial by your location        +1 646 558 8656 US (New York)        +1 669 900 9128 US (San Jose)        877 853 5247 US Toll-free        888 788 0099 US Toll-freeMeeting ID: 915 970 4974Find your local number: https://zoom.us/u/ad27hc6t7h   When: Thu 14 Jan 2021 16:00 – 17:00 United Kingdom Time Calendar: tf-a(a)lists.trustedfirmware.org Who: * Bill Fletcher- creator * marek.bykowski(a)gmail.com * okash.khawaja(a)gmail.com * tf-a(a)lists.trustedfirmware.org Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account tf-a(a)lists.trustedfirmware.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively, you can sign up for a Google Account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organiser and be added to the guest list, invite others regardless of their own invitation status or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

3 years, 9 months

1
0
0 0

CANCELLED: TF-A Tech Forum Agenda @ Thr 14th January 2021 16:00-1700 GMT

by Joanna Farley

Apologies for the late notice I am cancelling this weeks TF-A Tech forum tomorrow as the subject I had hoped to get presented is not ready and I don’t have any alternative for this slot. I will look to have something for the next session on 28th January. Apologies for the late notice. Cancellations of the calendar invite will come from trustedformware.org as I don’t own the invite so it may not appear in your calendars until that is sent out. Thanks Joanna

3 years, 9 months

1
0
0 0

[PATCHv5 0/3] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

v5: - removed vms flag, added fdt (Andrew Jones) - added patch3 to combine secure and non secure pl061. It has to be more easy to review if this changes are in the separate patch. v4: rework patches accodring to Peter Maydells comments: - split patches on gpio-pwr driver and arm-virt integration. - start secure gpio only from virt-6.0. - rework qemu interface for gpio-pwr to use 2 named gpio. - put secure gpio to secure name space. v3: added missed include qemu/log.h for qemu_log(.. v2: replace printf with qemu_log (Philippe Mathieu-Daudé) This patch works together with ATF patch: https://github.com/muvarov/arm-trusted-firmware/commit/dd4401d8eb8e0f3018b3… Previus discussion for reboot issue was here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg757705.html Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: add secure pl061 for reset/power down arm-virt: combine code for secure and non secure pl061 hw/arm/Kconfig | 1 + hw/arm/virt.c | 118 +++++++++++++++++++++++++++++++++++------- hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 2 + 6 files changed, 175 insertions(+), 20 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c -- 2.17.1

3 years, 9 months

1
3
0 0

New Defects reported by Coverity Scan for ARM-software/arm-trusted-firmware

by scan-admin＠coverity.com

Hi, Please find the latest report on new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. 1 new defect(s) introduced to ARM-software/arm-trusted-firmware found with Coverity Scan. New defect(s) Reported-by: Coverity Scan Showing 1 of 1 defect(s) ** CID 365287: Control flow issues (MISSING_BREAK) /plat/xilinx/zynqmp/pm_service/pm_svc_main.c: 334 in pm_smc_handler() ________________________________________________________________________________________________________ *** CID 365287: Control flow issues (MISSING_BREAK) /plat/xilinx/zynqmp/pm_service/pm_svc_main.c: 334 in pm_smc_handler() 328 SMC_RET1(handle, (uint64_t)ret); 329 330 case PM_SET_MAX_LATENCY: 331 ret = pm_set_max_latency(pm_arg[0], pm_arg[1]); 332 SMC_RET1(handle, (uint64_t)ret); 333 >>> CID 365287: Control flow issues (MISSING_BREAK) >>> The case for value "PM_GET_API_VERSION" is not terminated by a 'break' statement. 334 case PM_GET_API_VERSION: 335 /* Check is PM API version already verified */ 336 if (pm_ctx.api_version >= PM_VERSION) { 337 if (!ipi_irq_flag) { 338 /* 339 * Enable IPI IRQ ________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P…

3 years, 9 months

1
0
0 0

Re: [TF-A] Routing FIQ timer interrupts to EL3 on Raspberry Pi 4B

by Manish Pandey2

Hi To understand the interrupt handling in TF-A, i recommend you go through https://trustedfirmware-a.readthedocs.io/en/latest/design/interrupt-framewo… To debug your problem, you need to first check if the timer interrupt is generated as FIQ and check whether it indeed is trapped in EL3 (checking SCR_EL3.FIQ=1). Regarding build errors while adding .S files and your assembly implementation, it will be better if you share your code (may be pushing a patch on https://review.trustedfirmware.org). Thanks Manish ________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Ian Burres via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 06 January 2021 17:56 To: tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org> Subject: [TF-A] Routing FIQ timer interrupts to EL3 on Raspberry Pi 4B I am attempting to route FIQ timer interrupts using the ARM timers (not system timers) to EL3 in order to achieve introspection. I am running TF-A (cross compiled for AArch64/AArch32) on a Raspberry Pi 4B, which uses the Broadcom 2711 chipset. I have written some code, but I am not an embedded software engineer – I’m an IoT pentester. The ARM timers look like this: RPI4_ARM_TIMER_LOAD 0x400 RPI4_ARM_TIMER_VALUE 0x404 ….. RPI4_ARM_TIMER_FREE_COUNTER 0x420 System timers are: RPI4_SYS_TIMER_CLO, RPI4_SYS_TIMER_CS, etc… I have successfully implement a Linux driver that allows me to dump kernel page tables and memory; however, I cannot see user page tables (even after running a CPU intensive program ). I believe the only way to view user page tables is to have interrupts routed to EL3 – a Linux driver is not sufficient. I have 3 UARTs attached with a debug log and screen setup. From what I have read, the Raspberry Pi 4B uses GICv2. TF-A supports EL3 routing when the build option GICV2_GO_FOR_EL3 is enabled, which I have done. >From what I have gathered, the FIQ interrupt has to be written in assembly. So far, I have created a vector table, loaded the vector table, and masked and unmasked interrupts using daifclr, #3 and daifset, #3 instructions, using inline assembly. The timer is initinitialized and handled using C functions. I am using inline assembly, because I am adding code to the TF-A base, and I have not discovered how to add .S files to the build without receiving make errors. I will gladly share the code I have if it helps, but what I am really looking for is if anyone believes I am on the right track or not. Obviously, I am not implementing something correctly since the interrupt is not being handled. Thanks. Thomas Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

3 years, 10 months

2
1
0 0

[PATCHv3] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Use the same gpio 3 and gpio 4 which were used by non acpi variant of linux power control gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov(a)linaro.org> --- v3: added missed include qemu/log.h for qemu_log(.. v2: replace printf with qemu_log (Philippe Mathieu-Daudé) hw/arm/Kconfig | 1 + hw/arm/virt.c | 24 ++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 85 +++++++++++++++++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 1 + 6 files changed, 115 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 0a242e4c5d..13cc42dcc8 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -17,6 +17,7 @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 96985917d3..eff0345303 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -147,6 +147,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_RTC] = { 0x09010000, 0x00001000 }, [VIRT_FW_CFG] = { 0x09020000, 0x00000018 }, [VIRT_GPIO] = { 0x09030000, 0x00001000 }, + [VIRT_SECURE_GPIO] = { 0x09031000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, @@ -189,6 +190,7 @@ static const int a15irqmap[] = { [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, [VIRT_ACPI_GED] = 9, + [VIRT_SECURE_GPIO] = 10, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -864,6 +866,24 @@ static void create_gpio(const VirtMachineState *vms) g_free(nodename); } +static void create_gpio_secure(const VirtMachineState *vms) +{ + DeviceState *pl061_dev; + static DeviceState *gpio_pwr_dev; + + hwaddr base = vms->memmap[VIRT_SECURE_GPIO].base; + int irq = vms->irqmap[VIRT_SECURE_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(vms->gic, irq)); + + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qdev_connect_gpio_out(pl061_dev, 3, qdev_get_gpio_in(gpio_pwr_dev, 3)); + qdev_connect_gpio_out(pl061_dev, 4, qdev_get_gpio_in(gpio_pwr_dev, 4)); +} + static void create_virtio_devices(const VirtMachineState *vms) { int i; @@ -1993,6 +2013,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms); } + if (vms->secure) { + create_gpio_secure(vms); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index b6fdaa2586..f0e7405f6e 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -8,5 +8,8 @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index 0000000000..0d0680c9f7 --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -0,0 +1,85 @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov(a)linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; + qemu_irq irq; +}; + +static void gpio_pwr_set_irq(void *opaque, int irq, int level) +{ + GPIO_PWR_State *s = (GPIO_PWR_State *)opaque; + + qemu_set_irq(s->irq, 1); + + if (level) { + return; + } + + switch (irq) { + case 3: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + break; + case 4: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "qemu; gpio_pwr: unknown interrupt %d lvl %d\n", + irq, level); + } +} + + +static void gpio_pwr_realize(DeviceState *dev, Error **errp) +{ + GPIO_PWR_State *s = GPIOPWR(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + sysbus_init_irq(sbd, &s->irq); + qdev_init_gpio_in(dev, gpio_pwr_set_irq, 8); +} + +static void gpio_pwr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = gpio_pwr_realize; +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .class_init = gpio_pwr_class_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 5c0a7d7b95..79568f00ce 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -1,5 +1,6 @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index abf54fab49..77a4523cc7 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -81,6 +81,7 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, -- 2.17.1

3 years, 10 months

3
3
0 0

Routing FIQ timer interrupts to EL3 on Raspberry Pi 4B

by Ian Burres

I am attempting to route FIQ timer interrupts using the ARM timers (not system timers) to EL3 in order to achieve introspection. I am running TF-A (cross compiled for AArch64/AArch32) on a Raspberry Pi 4B, which uses the Broadcom 2711 chipset. I have written some code, but I am not an embedded software engineer – I’m an IoT pentester. The ARM timers look like this: RPI4_ARM_TIMER_LOAD 0x400 RPI4_ARM_TIMER_VALUE 0x404 ….. RPI4_ARM_TIMER_FREE_COUNTER 0x420 System timers are: RPI4_SYS_TIMER_CLO, RPI4_SYS_TIMER_CS, etc… I have successfully implement a Linux driver that allows me to dump kernel page tables and memory; however, I cannot see user page tables (even after running a CPU intensive program ). I believe the only way to view user page tables is to have interrupts routed to EL3 – a Linux driver is not sufficient. I have 3 UARTs attached with a debug log and screen setup. >From what I have read, the Raspberry Pi 4B uses GICv2. TF-A supports EL3 routing when the build option GICV2_GO_FOR_EL3 is enabled, which I have done. >From what I have gathered, the FIQ interrupt has to be written in assembly. So far, I have created a vector table, loaded the vector table, and masked and unmasked interrupts using daifclr, #3 and daifset, #3 instructions, using inline assembly. The timer is initinitialized and handled using C functions. I am using inline assembly, because I am adding code to the TF-A base, and I have not discovered how to add .S files to the build without receiving make errors. I will gladly share the code I have if it helps, but what I am really looking for is if anyone believes I am on the right track or not. Obviously, I am not implementing something correctly since the interrupt is not being handled. Thanks. Thomas Sent from Mail for Windows 10

3 years, 10 months

1
0
0 0

[PATCHv2] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Use the same gpio 3 and gpio 4 which were used by non acpi variant of linux power control gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov(a)linaro.org> --- v2: replace printf with qemu_log (Philippe Mathieu-Daudé) hw/arm/Kconfig | 1 + hw/arm/virt.c | 24 +++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 84 +++++++++++++++++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 1 + 6 files changed, 114 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 0a242e4c5d..13cc42dcc8 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -17,6 +17,7 @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 96985917d3..eff0345303 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -147,6 +147,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_RTC] = { 0x09010000, 0x00001000 }, [VIRT_FW_CFG] = { 0x09020000, 0x00000018 }, [VIRT_GPIO] = { 0x09030000, 0x00001000 }, + [VIRT_SECURE_GPIO] = { 0x09031000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, @@ -189,6 +190,7 @@ static const int a15irqmap[] = { [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, [VIRT_ACPI_GED] = 9, + [VIRT_SECURE_GPIO] = 10, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -864,6 +866,24 @@ static void create_gpio(const VirtMachineState *vms) g_free(nodename); } +static void create_gpio_secure(const VirtMachineState *vms) +{ + DeviceState *pl061_dev; + static DeviceState *gpio_pwr_dev; + + hwaddr base = vms->memmap[VIRT_SECURE_GPIO].base; + int irq = vms->irqmap[VIRT_SECURE_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(vms->gic, irq)); + + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qdev_connect_gpio_out(pl061_dev, 3, qdev_get_gpio_in(gpio_pwr_dev, 3)); + qdev_connect_gpio_out(pl061_dev, 4, qdev_get_gpio_in(gpio_pwr_dev, 4)); +} + static void create_virtio_devices(const VirtMachineState *vms) { int i; @@ -1993,6 +2013,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms); } + if (vms->secure) { + create_gpio_secure(vms); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index b6fdaa2586..f0e7405f6e 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -8,5 +8,8 @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index 0000000000..f5868653b3 --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -0,0 +1,84 @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov(a)linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; + qemu_irq irq; +}; + +static void gpio_pwr_set_irq(void *opaque, int irq, int level) +{ + GPIO_PWR_State *s = (GPIO_PWR_State *)opaque; + + qemu_set_irq(s->irq, 1); + + if (level) { + return; + } + + switch (irq) { + case 3: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + break; + case 4: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "qemu; gpio_pwr: unknown interrupt %d lvl %d\n", + irq, level); + } +} + + +static void gpio_pwr_realize(DeviceState *dev, Error **errp) +{ + GPIO_PWR_State *s = GPIOPWR(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + sysbus_init_irq(sbd, &s->irq); + qdev_init_gpio_in(dev, gpio_pwr_set_irq, 8); +} + +static void gpio_pwr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = gpio_pwr_realize; +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .class_init = gpio_pwr_class_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 5c0a7d7b95..79568f00ce 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -1,5 +1,6 @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index abf54fab49..77a4523cc7 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -81,6 +81,7 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, -- 2.17.1

3 years, 10 months

1
0
0 0

[PATCH] arm-virt: add secure pl061 for reset/power down

by Maxim Uvarov

Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Use the same gpio 3 and gpio 4 which were used by non acpi variant of linux power control gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov(a)linaro.org> --- This patch works together with ATF patch: https://github.com/muvarov/arm-trusted-firmware/commit/dd4401d8eb8e0f3018b3… Previus discussion for reboot issue was here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg757705.html Regards, Maxim. hw/arm/Kconfig | 1 + hw/arm/virt.c | 24 +++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/gpio_pwr.c | 83 +++++++++++++++++++++++++++++++++++++++++++ hw/gpio/meson.build | 1 + include/hw/arm/virt.h | 1 + 6 files changed, 113 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 0a242e4c5d..13cc42dcc8 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -17,6 +17,7 @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 96985917d3..eff0345303 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -147,6 +147,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_RTC] = { 0x09010000, 0x00001000 }, [VIRT_FW_CFG] = { 0x09020000, 0x00000018 }, [VIRT_GPIO] = { 0x09030000, 0x00001000 }, + [VIRT_SECURE_GPIO] = { 0x09031000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, @@ -189,6 +190,7 @@ static const int a15irqmap[] = { [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, [VIRT_ACPI_GED] = 9, + [VIRT_SECURE_GPIO] = 10, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -864,6 +866,24 @@ static void create_gpio(const VirtMachineState *vms) g_free(nodename); } +static void create_gpio_secure(const VirtMachineState *vms) +{ + DeviceState *pl061_dev; + static DeviceState *gpio_pwr_dev; + + hwaddr base = vms->memmap[VIRT_SECURE_GPIO].base; + int irq = vms->irqmap[VIRT_SECURE_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, + qdev_get_gpio_in(vms->gic, irq)); + + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qdev_connect_gpio_out(pl061_dev, 3, qdev_get_gpio_in(gpio_pwr_dev, 3)); + qdev_connect_gpio_out(pl061_dev, 4, qdev_get_gpio_in(gpio_pwr_dev, 4)); +} + static void create_virtio_devices(const VirtMachineState *vms) { int i; @@ -1993,6 +2013,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms); } + if (vms->secure) { + create_gpio_secure(vms); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index b6fdaa2586..f0e7405f6e 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -8,5 +8,8 @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index 0000000000..dded12381b --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -0,0 +1,83 @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov(a)linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; + qemu_irq irq; +}; + +static void gpio_pwr_set_irq(void *opaque, int irq, int level) +{ + GPIO_PWR_State *s = (GPIO_PWR_State *)opaque; + + qemu_set_irq(s->irq, 1); + + if (level) { + return; + } + + switch (irq) { + case 3: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + break; + case 4: + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + break; + default: + printf("qemu; gpio_pwr: unknown interrupt %d lvl %d\n", + irq, level); + } +} + + +static void gpio_pwr_realize(DeviceState *dev, Error **errp) +{ + GPIO_PWR_State *s = GPIOPWR(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + sysbus_init_irq(sbd, &s->irq); + qdev_init_gpio_in(dev, gpio_pwr_set_irq, 8); +} + +static void gpio_pwr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = gpio_pwr_realize; +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .class_init = gpio_pwr_class_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 5c0a7d7b95..79568f00ce 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -1,5 +1,6 @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index abf54fab49..77a4523cc7 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -81,6 +81,7 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, -- 2.17.1

3 years, 10 months

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

TF-A